38 Inch 1250 CFM Hammered Copper Wall Mounted Euro Range Hood with Screen Filters HV-EURO38-C2036BP1-TW

Features

• The product is handcrafted by artisans in Mexico; not machine stamped.
• Natural antibacterial and antimicrobial properties.
• Copper is one of the most hygienic materials you can have in your home.
• Lighting: 2x LED Lights Included
• Electrical: Runs at 115 AC, 60 Hz, 9 AMPS (15 AMP Circuit Recommended).
• Distance Codes: Check local codes and cooking appliance specifications. Suggested distance between stove top and and range hood is 36".
• Important note: Due to the handcrafted nature of this product small variances in size and colour may occur.
• The product is lead-free (less than .01%).
• The product is 99.7%, pure recycled copper.
• Material gauge: 18 Gauge.
• Duct: Two 7" Round Vents. Ducting must exit outside the structure.
• Besides checking the product measurements, you should also:
• Check your venting capabilities; Check if your home has installed ductwork. If it does, or you plan on getting it installed, you should look for a ducted (vented) or convertible range hood. If your home does not have installed ductwork, you should choose a ductless (non-vented) or convertible range hood.
• Measure Your Space: First, measure the width of your cooking surface from one side of the cooktop to the other. Next, measure the width of the area between cabinets where your range hood will live (if applicable). Then, measure the space between the cooking surface and cabinets or ceiling above. There should be anywhere from 24 to 36 inches between the bottom of the range hood and the cooktop surface. Finally, measure the depth from front to back of the cooking surface.