Brosse de nettoyage de cheminée

Packaged well, worked perfectly. No complaints. Protip - make sure you lock each section VERY securely. We had a segment of the brush detach while it was in the flue and it was a messy pain in the rear to correct it. That was user error.

I really like this unit. It works great without having to climb on top of my roof that has a 12/12 pitch. I did it for the first time this fall (2022) so I have to refine my layout so I don't get as much dust around the room, but it was very little. I am going to hook up the shop vac close to the hole and see how that works, but this thing did the job and it comes with a spare brush which is really nice. I was able to tell a difference using my endoscope.

works great and probably saved my life from not having to climb up on a 10/12 pitch roof and drag a step ladder up and lean it against a chimney to brush out a 35 ft. chimney. my wife also thanks you for keeping this 72 year old man off the roof, and possibly the ground.

Did a very good job on metal chimney. Also used in square flue made from terracotta clay. Did a good job in both. Easier than screwing brush rods together. job go quickly. Drill made Oil button connects on rods for easier disconnect.

Cleaned my 2 story 7" clay chimney with ease. I inserted the rods through the external clean out door which is 1.5 feet of the ground. The rods had to pass through a 90 degree bend before travelling up about 35' to the top of the chimney. I used cordless drill to spin the rods with no issue adding two pole sections at a time. Once at the top, I slowly walked backward while continuing to spin the rods with drill till all of the rods came out then disassembled into 2 rod sections and went back up the chimney. Made 2 full passes and DONE. If the rods ever happen to separate (which is unlikely) everything should fall back down the chimney and not get stuck like a regular brush would. Used to clean the metal piping from the wood stove also, but would advise taking the piping outside first due to the soot cloud the spinning brush creates. Quality seems good especially for the price. The only issue I see is the drill adaptor which could strip out over time. It would be nice if they gave you a extra one or sold it separately just in case. Ordering another set right now to give to my old man for Christmas.