Portes de clôtures: marque - meiqi

This arched garden gate trellis is constructed from galvanized steel tubing with a powder coated finish for rust resistance. The structure measures 79.5 inches long, 19.7 inches wide, and 86.6 inches high, and it incorporates a double gate and two integrated side planter stands. Pre-cut tubing and pre-drilled holes allow assembly by one person. Use it to support climbing plants such as ivy, roses, morning glory, clematis, or jasmine. Clean the powder coated surface with soap and water.

This garden trellis is a freestanding structure made from galvanized steel tubing with a powder-coated finish. Each trellis measures 19.7 inches wide by 78.7 inches high, and the two-pack provides 39.4 inches of total width for vertical plant support. Pre-drilled components allow assembly by one person with common tools. The units can be used individually or combined into a screen or corner configuration. Integrated pot holders accommodate containers up to 6.6 pounds. Suitable for climbing plants such as ivy, roses, morning glory, clematis, jasmine, grapes, blackberries, cucumbers, beans, and peas.

This steel garden arch gate measures 79.92 by 20.04 by 87 inches and assembles with screws and staked mounting. A powder coated finish covers the 16 mm iron pole frame, while the double doors and integrated gate provide a structured entry point for climbing plants. The 22 lb frame supports ivy, rose, morning glory, clematis, jasmine, and campsis as they grow upward. Clean with soap and water for routine care.

This steel garden arch gate provides a structural entryway for climbing plants and outdoor events. Constructed from 16 mm diameter iron poles with a powder coated finish, it measures 79.92 inches long, 20.04 inches wide, and 87 inches high at 22 pounds. Double doors define the passage, while the open frame supports ivy, roses, morning glory, clematis, and jasmine. Two integrated stands accept flower pots. Full assembly is required and all tools are included. The unit wipes clean and stakes into the ground for placement at garden entrances, patios, or ceremony areas.

This birdcage-shaped garden arch is constructed from galvanized steel tubing with a powder-coated finish for double rust protection. Each pipe measures 0.63 inches in diameter, providing stable load-bearing and wind resistance. The overall structure spans 81.3 inches in diameter by 114.2 inches high, with a gate opening of 3.4 feet wide by 7.6 feet high. It assembles with basic tools and friend assistance using included instructions. Position it as a ceremony backdrop or garden focal point for climbing vines.

This garden arch gate is constructed from galvanized steel tubing with a powder-coated finish for rust resistance. The structure measures 58.07 inches long by 16.93 inches wide by 97.24 inches high and weighs 27.94 pounds. Square tubing members measure 0.79 by 0.79 inches for stability and load bearing. The integrated gate provides access and a sense of privacy. Pre-drilled holes and pre-cut parts allow assembly by one person with tools. Suitable for supporting climbing plants such as ivy, roses, morning glories, clematis, and jasmine in outdoor settings. Clean with soap and water.

This garden arch gate combines a galvanized steel frame with a powder coated finish for enhanced rust resistance. The structure measures 80.71 inches long, 16.93 inches wide, and 97.24 inches high, and includes an integrated planter base. Square tubing of 0.79 by 0.79 inches provides stable load-bearing support for climbing plants such as ivy, rose, morning glory, clematis, and jasmine. Pre-cut and pre-drilled components allow full assembly by one person with included tools, and the unit installs directly into the ground.

This garden arch gate supports climbing plants while defining outdoor spaces. It is constructed from galvanized steel tubing with a powder coated finish for corrosion resistance. The frame uses 0.63 inch diameter pipe and includes two side planter stands for flowers or pots. Measuring 79.5 inches wide by 19.7 inches deep by 86.6 inches high, it features a double gate and pre-drilled holes for full assembly with tools included.

This metal garden arch functions as a freestanding trellis for climbing plants and is constructed from galvanized steel tubing with a powder-coated finish. The frame measures 79.5 inches long, 19.7 inches wide, and 86.6 inches high, with a tube diameter of 0.63 inches for structural stability. Two integrated planter stands flank the arch, allowing direct planting or placement of flower pots. Pre-drilled holes and pre-cut components enable single-person assembly with included tools. Suitable for outdoor garden rooms and patios, providing vertical support for ivy, roses, morning glories, clematis, and jasmine.

This climbing plant support trellis measures 71 inches high by 19.7 inches wide and ships as a two-pack. Each unit is constructed from galvanized steel tubing with a powder-coated finish, providing double corrosion protection for outdoor placement. Pre-cut and pre-drilled components allow full assembly by one person using the included tools. The structure functions as a single vertical support or can be combined with additional units to form a screen or corner configuration. It suits climbing plants such as ivy, rose, morning glory, clematis, jasmine, grape, blackberry, cucumber, beans, and peas. Clean with soap and water.

This two-pack of galvanized steel garden trellises measures 86.7 inches high by 19.7 inches wide, providing vertical support for climbing plants. Each unit is constructed from galvanized tubing with a powder-coated finish for rust resistance. Pre-cut and pre-drilled holes allow assembly by one person using included tools. The stake mounting system secures the trellis in soil. Suitable for ivy, roses, morning glories, clematis, jasmine, grapes, blackberries, cucumbers, beans, and peas. Decorative bird, leaf, and flower elements accent the round tube frame.

This garden trellis set provides vertical support for climbing vines and flowering plants. Each panel is constructed from galvanized steel with a powder-coated finish for double rust prevention. The four panels assemble to an 80-inch span and can connect in multiple sets for extended runs. Standing 86.7 inches high at a 19.7-inch width, the stake-mounted trellises install with all tools included and wipe clean with soap and water.

This garden arch trellis is a freestanding metal structure designed to support climbing plants such as ivy, roses, morning glory, clematis, jasmine, and grapevines. It is constructed from galvanized steel tubing with a powder coated finish for anti-rust protection, and the 0.51 inch pipe diameter provides stable load-bearing. Assembly is required and can be disassembled for seasonal storage. The assembled dimensions are 55.0L x 14.5W x 94.5H inches, and it weighs 10.4 pounds.

Metal garden arch gate provides a stake-mounted climbing plant support structure for outdoor spaces. Constructed from iron with a powder-coated finish, it resists wear and weather. The arch assembles fully with all tools included and measures 43.2 inches long, 17.64 inches wide, and 90.48 inches high, weighing 18 pounds. It supports climbing plants such as ivy, roses, and morning glories in gardens or walkways.

Galvanized steel garden arch gate with a powder-coated finish provides dual-layer rust protection. The double gate design and two side planter stands allow direct flower growth or pot placement. Measuring 79.5 inches long, 19.7 inches wide, and 86.6 inches high, it includes pre-cut and pre-drilled holes for single-person assembly. The 0.63-inch pipe diameter supports climbing plants such as ivy, roses, morning glories, clematis, and jasmine. Clean with soap and water.

This garden arch is constructed from galvanized steel tubing with a black powder-coated finish, providing a dual-layer surface treatment. The square pipe measures 0.51 by 0.51 inches, offering structural stability for climbing plants. Pre-drilled holes and pre-cut components allow one-person assembly with included tools. At 59.0 inches long, 15.35 inches wide, and 98.4 inches high, it supports roses, ivy, and clematis. Clean with soap and water for routine maintenance.

This vertical trellis set provides four panels measuring 86.7 inches high by 19.7 inches wide, creating a tall support structure for climbing plants in outdoor garden settings. Each panel is constructed from galvanized steel tube with a powder coated finish, forming a dual-layer surface treatment for rust resistance. The pre-cut and pre-drilled components allow a single person to complete assembly. Panels can be installed individually or linked to form a wider screen or corner configuration. Suited for ivy vines, roses, morning glory, clematis, jasmine, grape, blackberry, cucumber, beans, and peas.

This garden arch is constructed from iron with a powder-coated finish. It measures 43.2 inches long, 17.64 inches wide, and 90.48 inches high, and weighs 18.0 pounds. The structure provides a supportive framework for climbing plants such as ivy, roses, and morning glories. Use it to define a garden entry or accent a walkway. Assembly is required and additional tools are needed. Clean with soap and water.

This garden trellis provides structural support for climbing plants in outdoor garden settings. Each trellis is constructed from galvanized steel tubing with a powder-coated finish for rust resistance. The stake-mounted design requires full assembly with additional tools not included. Each unit measures 17.7 inches wide by 71 inches high, and the two-pack offers flexible placement as a single support or combined screen. Wipe clean with a damp cloth to maintain the finish.

This garden arch trellis provides a structural support for climbing plants. Galvanized steel tubing with a powder coated finish forms the frame, with 0.51 inch diameter pipe for load bearing. Pre-cut tubing and pre-drilled holes allow full assembly by one person with included tools. The assembled footprint measures 55 inches long, 14.5 inches wide, and 94.5 inches high, and the unit weighs 10.4 pounds.

This garden arch gate is constructed from galvanized steel tube with a powder-coated finish for rust resistance. It measures 55 inches long, 14.5 inches wide, and 94.5 inches high, with a tube diameter of 0.51 inches. The stake mounting system allows direct insertion into soil, and full assembly requires all included tools. Suitable for climbing plants such as roses or ivy, it also serves as a decorative archway for events. Clean with soap and water.