This is a a two person job. One person has to be a handy Mandy. Second person would be your assistant who can lift and carry. (It was too heavy for me but that means that the materials were great). You will need 1) Power Drill 2) Philipps Driver 3) Padding, 4) Hammer + Nail (for the nails that need to be aligned manually) It took us 2 days to complete this project. The first day we worked on the frame structures. It was not hard but took time (over 3 hours). Just need to slide the panels that works similar to a puzzle. Then, securing them with screw and attachment. You would need a Philipps driver to manually secure the screws on a pre-drilled holes. However, one of the panels holes do not aligned to the metal holes. So, I had to use a power drill to drill through the Panel for it to align. The shelving panels were very tight, and needed to force it in. I had to asked the 2nd person to manhandle it. I didn't have a mallet. On 2nd day, we worked on the door alignments and screwing the door hinge to the metal bar. This is manual work and there were no pre-drilled hole guide. I had to place a padding on the bottom of the door to get the desired height of the door. Then used a hammer and a nail before drilling the self-drilling screws. The 2nd person has to make sure that the door does not fall. In terms of moving it on the desired place, it was heavy for me (then again, the weight is necessary to withstand weather and would not fall down). We were able to move it. Overall, this was a great product. I looks very beautiful and very sturdy. Strong Material. I would buy a second one. It is not an easy job.