Didn’t realize you couldn’t make the tree not blink.

Everyone loves it.

Nice product. Comes assembled.

Absolutely don’t look the size they do in the photo ad.

Initial setup: Looked nice on the website but there are issues. 1) The post is not completely stable. The sections are held together using knob screws; only 2 at each joint. There's enough slop in the joints that they wobble, pivoting inline with the knob screws. This problem would have been prevented had they used 3 screws. 2) The "branches" are held in place with tape. About 1/2 are fairly well secured but the rest move around. I've tried pushing the branches down, which helped with some of them. 3) The lights on the branches are taped to a central spine. Unfortunately, when taped in place, they were too lazy to separate them around the spine. Instead they are bunched together along one side of the spine. Made it hard to spread them around. Post Christmas: Don't buy this "tree". When I went to take down the decorations I found that over half of the branches had rotated towards the East due to the wind; and the wind had not been very strong. I found all of those branches were loose. I tried to push them down again to keep them in place but it did not work; nothing keep them in place. In hindsight I should have returned it immediately when I saw the initial problems. I kept it because I wanted what I thought would be an easily setup tree next to my animatronic Santa Claus.