Attelage rapide de tracteur

Works great with the1023e I purchased it fori haven't had any problem with it will use vevor again speedy delivery

When it was Delivered, It was missing parts and others were broken. CS refunded part of the price so I could get parts made locally as they claimed they could not get parts. Once I got the parts made I quickly found out what a piece of Garbage this was. The 1 Original Quick Release Handle ( 1 was missing when I got it ) actually fell off somewhere as it appears the Pin that is supposed to lock it in fell out. I hooked the Brush Cutter up and within a short time the lower metal where the Tractor Forks hook up on this Hitch was bending like soft butter due to the side to side movement of the cutter.

Hitch arrived quickly . The channels that fit the lower joints on the tractor were too narrow an would not fit the John Deer 1026R I had to use a hammer to open them wider to fit . That was not easy . Disappointed. The hitch works well .

The pins for the bottom arm connections are cheap made, I switched them out for heavier pins. The bottom was too close together to just slide over the balls on the lower arms of my tractor. I had to spread the metal to slip it on the lower arms. The weld in the ball hitch receiver had to be ground down for my Reese ball hitch to slide into. Also the pin holes for the ball hitch are to small for the Reese pins to fit in. Overall if you are not good at re-engineering I would recommend another brand.

Well made, although I haven't used it enough to attest to longevity after heavy use. Good value for the price point, no other on the market even close to the price & quality that I could find.