7 pi L 8 pi. D Remise de rangement en métal

Bonjour pour la remise 7 par 8, je suis dessus parce que j'ai commandé une remise 7x8 et j'ai reçu une remise 7x7 et pas à lala bon abresse et cette journée là il a pluie très fort et boite très mouillé et les boîte ont plié et la toile plié aussi et je peu pas le retourner désolé.

Instructions are poor. To cope, focus on the location of holes. All instruction graphics are extremely small, and parts are sometimes not labelled. And if they are, part numbers are odd: WSJ-7 for instance and WSJ-6. Screws are extremely small and washers are flimsy plastic. I needed two helpers. Brackets don’t line up. I don’t feel like the customer should have to make their own drilled holes either. EVERY single piece has its own wrapping and plastic coating. It takes hours to even get things out of the box and ready to go. This thing has no floor. Also, not quite 7 x 7’ either.

It is a functional shed only after a lot of work. Many reviews note the difficulty of assembly and poor instructions and I fully concur. I will note below some specifics that have not been mentioned. The good news is that it is an adequate shed. My opinion is that while it is not robust it is not too flimsy to be of use. It is in use and it is useful storage for my lawnmowers and boat motors. It is built and anchored on what was an open spot of concrete driveway and a draining rubber mat was bought for a floor. The doors and lock would be child's play to break into so if it were not in a secure location that would be a worry. The shed was delivered with major dents in two pieces. They are to be replaced under warranty with delivery expected tomorrow. The problem was deciding to go ahead and build the shed then install the replacement panels after they arrive which will be pretty hard, or wait for the panels to finish building the shed and put it to use. The former was the decision because the latter would mean a month between ordering the shed and being able to put it together. Whether the dents occurred at the factory or during shipping is hard to know. The box the shed was shipped in was torn but the inside box the parts were in looked fine. If the damage occurred during shipping then better packing materials would have helped, knowing that such a large heavy box would be prone to being handled roughly. Most of the metal panels had a protective film that took hours to remove. It was sticky so hard to pull off, and fragile so easy to tear while pulling. It seemed like half a day was spent just to get the film off and the galling thing was that so many of the panels did have scratches in the paint anyway. I could not help but notice that many of the online videos showed that the reviewer had not removed the film. The instructions pictured the assembly of each section but there was no advice on what order to do each step. In a number of places it seemed necessary to figure out for oneself how each piece went together. The instructions had the wrong part number in a couple of places. For the doors there were two problems. There was no way the lower door latch would work if installed per the instructions and where the holes were drilled. A new hole had to be drilled for it to be in the right place. There was no way the doors would close with the included screws. The pan head screws protruded too much and the two halves of the hinge ran into the door edges keeping the door from closing. 32 flat head screws had to be bought at a local hardware store to use instead. The doors did not close with the provided screws and they did with the separately purchased screws. On the box it said "The product comes in One boxes (sic). Pls install after receiving all boxes. If you have any problem (sic), pls contact is through the online platform." Do they mean one or do they mean boxes? Hard to know. Turned out in the end everything was in one box. They were optimistic to say there would be a problem and not problems. What online platform? Hard to know? It took some research and four emails to find the right place for the warranty replacement request to be placed.

Shed is of poor quality leaks on sides top roof cannot put anything into it

Thanks for adding door directions. Very study after all together. Needs a few more clarifications in shed directions would make it easier.