The plug in wall heater mounts at a wall outlet and directs 450W of ceramic heat into the room, so no floor space is used. Because it plugs into the wall, the heater can be fitted in a bedroom, office or bathroom without running a new circuit. The housing stays cool enough to handle during normal useA timer and two fan speeds let you warm a small room for a set period and then let the unit switch itself off. The fan can run at a lower speed for gentle air movement or a higher speed when the room needs heat quickly. It can be moved between rooms when needed. The outer surfaces wipe clean with a soft clothA remote control is included, so the temperature and timer can be set without reaching up to the unit. The temperature can be set within a comfortable indoor range, and the heater holds that level rather than cycling on and off at full power. The heater plugs into a standard outlet, so no installation, fuel or venting is neededOverheat protection and open window detection are built in, so the heater responds when the room loses heat unexpectedly. The wall mounted body keeps the element away from walkways and furniture. It can be moved between rooms when the season changes. The PP housing in Black and white measures plug in wall unit, which suits a bedroom, office or small living roomInstall the unit on a wall near an outlet, leaving clearance above and below for airflow. The PP housing wipes clean with a soft cloth, and the compact size suits small rooms and narrow walls. Warm air is pushed into the room by the fan rather than left to rise from a hot surface. The setting can be changed on the unit itself, without reaching for a separate control