Sturdy. Cord pass thru setup is good. Can be mounted to other bases for stability, which is a plus. Down side is that the top grommet opening is just a shade too far forward so when I insert a power brick (bought separately) it just slightly blocks the drawer from fully closing. Required some modifications, but got it working the way I needed. Another slight downside is that the power pass thru setup is side-to-side only, with no grommet openings to the rear and the shelf in the bottom half is not designed to actually accommodate a cord from the top grommet opening easily getting to the power cords one passes through at the bottom. Again, I modified to make it work. Last downside is that some of the hardware pulls actually separated into component pieces. It comes attached reversed, which is standard to avoid damage in shipping. When I removed it to put it on the outside of the doors and drawers, some parts separated further than they should have. This required a star wrench to reassemble. Thankfully I have one and they went back together easily. Might have been more frustrating if I did not. Couple challenges, but overall, very pleased.

I purchased this piece with 2 other pieces to go in our break/copy room at work. It turned out perfect, dimensions were exact, and all together a good look.