Model NEV-331-MP-32 is part of Outwater's Natural Elements Decorative Flexible Tambour collection - a nominal 4 ft. x 32 in. 30-degree grooved flat slat wood tambour wall panel crafted from an MDF core faced with real Maple veneer. Each sheet covers approximately 10.67 sq. ft. and is built on a canvas backing that lets the panel flex at every slat joint, so it can be adhered flat or wrapped around curves down to a 2 in. minimum radius. The 30-degree grooved flat slat profile stands 5/32 in. proud of the backer with 0.75 in. wide slats, creating the rhythmic shadow lines that make slat walls a signature detail in contemporary interiors. At a countertop-height 32 in., this size suits kitchen islands, bar fronts and counter faces particularly well. Every slat is hand-selected for grain and color consistency, and the panel ships unfinished - ready to stain, paint or clear coat to match your palette. Installation is straightforward: apply construction adhesive to the back of the sheet, press it to the substrate, then trim with a fine tooth saw or score length-wise with a utility knife. Specify NEV-331-MP-32 for feature walls, ceilings, wainscoting, pole wraps, bar fronts, reception desks, casework, drawer fronts and tambour doors across residential, hospitality, retail and commercial projects. At roughly 7.33 lbs. per sheet, it is easy for one installer to handle and fast to finish.
