So far the valve assembly is good. However the shower head assembly is unacceptable! The threads that screw into the wall are not welded. The assembly is held together with set screws and made water tight with a gasket. We were lucky that the assembly failed during install and the leak was discovered early. The plumber was screwing the assembly into position when it just started freely turning. It would not tighten and would not unscrew. We had to cut the assembly and use an easy out to remove the remainder of the failed assembly. As a warning to others, this assembly could fail and start leaking at any time during or after install and go unnoticed causing serious damage to the walls and health issues. I would recommend replacing this shower head assembly.

The quality is not too good