Great for one for the laundry and one for the workshop.

Unbelievably poor value. The first one I received had many dents in the sink tub because the hardware was loose inside. The second one had the same packaging issue, but there were few enough dents to merit installing after waiting an extra week without a sink. Except for the lower front finish piece, the entire assembly is low quality particle board. It is so weak that hand tightening the screws will strip them rather than clamp the parts together. Many of the screws are not the right length with only a single thread going into the other piece of wood, so they also will immediately strip. The dowels will often punch through the surface of the adjacent part rather than seating correctly, but if you try to tap them in with a mallet, they may split the particle board. The faucet and drain parts are cheap-feeling plastic. This might be a decent item at $300, but for $500+ go with whatever your local home improvement store has instead of this.

This should work great in our new laundry room. I really wanted a sink in there for hand washing, and this won’t take up too much space.

Faucet included is worthless.