La porte de baignoire élégante Aura est disponible en 4 finitions. Ce modèle est une porte de dérivation, avec 2 panneaux de verre coulissants pour une entrée flexible et un accès facile à gauche ou à droite.
La porte de douche sans cadre de 6 mm (1/4 po) assure la stabilité. La poignée horizontale peut également servir de barre à serviettes.
Cette porte est facile à installer et offre des caractéristiques de sécurité telles que le verrouillage de la tête et le panneau anti-saut, gardant le panneau de verre bien en place. De plus, notre tête de lit réversible est une caractéristique unique qui permet une expérience d'installation personnalisée, de sorte que vous pouvez décider quel style vous convient le mieux: un côté rond ou un côté plat. Malgré ses caractéristiques haut de gamme, la porte de douche est offerte à un prix abordable et offre une garantie limitée de 10 ans, assurant la satisfaction du client et la tranquillité d'esprit.
[Employee of americanbathgroup] The Aura is an easy to install door, with a simple construction, great for DIY installs.
Here are some tips to make the installation easier:
-It's very important to get a square, clean cut on the threshold and header. Go slowly, and use a clamp or miter box to hold the piece in place
-Make sure to tape the threshold in place to prevent it from moving during the rest of the assembly
-It helps to have a second person on this install, especially for putting the wall jambs in place. Use a pencil to mark the location of the edge of the wall jamb once it's level in case you need to re-adjust
-Check which screws to install and when for the wall jambs, to avoid having to remove them to put the bumpers or brackets in place
-Go slowly while installing the wall jamb screws to prevent warping the wall jambs
-The washer in the glass panel allows for some adjustment for ease of installation. If after putting the panel bracket on the washer is in the wrong place, it's easiest to remove the bracket and reposition the washer. For small adjustments, a non-abrasive tool such as a wooden dowel may be used carefully, ensuring the glass is not contacted directly.
-Once you have the door panels in place, check the alignment before moving onto the next steps. It's easier to level them before putting the threshold guide in place.
-Push both doors to one end to easily put the threshold guide in place, and make sure the lip on the washer is facing OUT before tightening
-Don't forget to put the anti-jump brackets in place before using the shower, it's a critical safety feature. Sean. Montréal. Mon Jan 26 2026