Features

• The material is a linen blend, so it is more like the pictures of a stretchy material.
• Distance between the bottom of the headboard and slats (full-size): 9.8".
• The upholstery can be cleaned by the following methods: Vacuum the bed: Start by using a vacuum cleaner to remove any loose dirt, dust, or debris from the linen upholstery. Use the upholstery attachment on your vacuum, which usually has a soft brush head to avoid damaging the fabric.
• Remove any stains: If there are any stains on the bed, use a clean, damp cloth to gently blot the affected area. Do not rub the stain, as this may cause it to spread or become deeper in the fabric. For tougher stains, you can use a mild cleaning solution that is safe for linen upholstery. Be sure to test the solution on a small, inconspicuous area first to make sure it doesn't damage the fabric.
• Dry the bed: After cleaning, allow the bed to air dry completely before using it again. Do not use a hairdryer or any other artificial heat source to speed up the drying process, as this may damage the fabric.
• Protect the fabric: To protect the linen upholstery from future stains, you can apply a fabric protector spray. Be sure to follow the instructions on the spray bottle carefully and test it on a small area first.
• The upholstery materials in this product contain no added flame-retardant chemicals. The State of California has updated the flammability standard and determined that the fire safety Requirements for this product can be met without adding flame retardant chemicals. The state has identified many flame retardant chemicals as being known to, or strongly suspected of, adversely impacting human health or development.
• The product is attached with a hook and a loop.
• The length from the footboard of the queen-sized bed to the leg in the middle of the bed is 35 inches.
• Can use 12 inches of mattress thickness or even less
• Floor to top of bed frame: 11.8"
• The distance between the bottom of the headboard and the slats for the full and king size is about 9.8".
• The interior dimensions of the queen-size bed are about 80.1" L x 60.2" W.
• The interior dimensions of the king-size bed are about 79.9" L x 76” W.
• The height from the floor to the top of the mattress is around 26.8", depending on the thickness of the mattress.
• The distance between the bottom of the headboard and the slats for the queen size is about 10.2''.
• Side Rails Height: about 12"
• Distance Between Every 2 Slats: about 3.9"
• The interior dimensions of the full-size option are about 75.2" L x 53.9" W.
• Height from floor to the slats: 11.8"
• Slat thickness: about 1.8"
• All three sizes have wings in the same dimensions the height is 44.88", the length is 16.33" for the bottom part, 6.3" for the top part, and the width is 1.77".
• The size of the slats is 74.60"L x 3.15"W x 2.36"H
• The gap between the bottom of the headboard and the slats: is 10"