Présentoir à plantes à 10 niveaux en bois massif

Looks great. I like that they included gloves to keep my hands from turning black. My only complaint is the instructions could have been clearer so I didn’t need to pull plastic connectors back off to get the correct orientation.

This plant stand is very nice and made of good wood. It was very easy to assemble following the included directions and there are even a few additional pieces of wood in the event something is ever lost.

I ordered the plant stand and it arrived in a week. The kit included a plastic hammer which was lightweight and easier to handle. Also included is a pair of gloves which keep your hands from turning black when I didnt read the directions first. I separated all of the parts without the gloves and my hands were dirty from the wood due to the stain process. The directions were easy to read, you just need to make sure all of connectors are facing the same way. This plant stand has enough room for 10 plants and can be used indoors or outdoors. When the shelf is connected, it is approximately 47 long. The tallest shelf is approximately 40 high, the next shelf is about 32 and the last shelf is 26 high. You can place a pretty good-size plant on each space. It also fits under a ewe of the roof. I would recommend this plant stand for indoors or outside use.

This item was pretty easy to put together! Comes with everything you need! It’s a little intimidating when you open the box and see the pieces but it’s not bad at all! There is a mallet and gloves to prevent splinters as well, so I thought that was nice! Overall pretty pleased!

The plant stand was very easy to put together and took about 30 minutes for one person to do it. They give you gloves to protect your hands from the varnish on the wood and a handy little plastic mallet, to make sure each piece is fully seated. A few of the sticks were warped and had to be shaped to fit into the plastic connectors. Nails in the grid pieces were visible and a little wood filler in a matching color was necessary to cover this up. To speed up assembly, I recommend sorting all of the short sticks from the medium sticks from the long sticks. There is only one spare for each item. Overall, this unit is fairly sturdy and lightweight. I would recommend that if you keep it outside, you put some sort of protective coating over it as the color runs.