Cette chaise de travail apporte une touche de style rustique à votre bureau personnel ou à votre espace de travail. Ses planches grossièrement taillées présentent des marques de scie et des nœuds qui ajoutent du caractère à la pièce. Cette chaise en bois massif est fabriquée avec des cadres à tenon et mortaise, des dessus à rainure et languette, et des côtés de cadre et de panneau pour plus de solidité. Le revêtement en polyester beige du siège offre une surface confortable, tandis que les accoudoirs fixes offrent un soutien supplémentaire. Il est doté d'une fonction pivotante, d'une hauteur réglable et d'un verrou d'inclinaison, ce qui le rend idéal pour une utilisation moyenne (jusqu'à 8 heures). Avec sa structure et son dossier gris foncé, cette chaise complète une variété de styles de décor. De plus, il est équipé de roulettes pour faciliter le déplacement et est compatible avec les planchers de tuiles.
We bought 4 chairs for a game table. The chairs arrived quickly. Only one had damage, caused by the shipper. The packaging for the chairs was acceptable. The shipper's forklift pushed in on one side and hit the arm of one chair, putting a crack where the arm meets the chair. This is not a showstopper, as I am able to fix issues like this.
the pros:
The chairs are SOLID wood. They are not pressboard, or any other manufactured wood product. The entire chair from the base seat frame to the top of the back rest, and the arms are SOLID wood. There is a lot of wood, so the chair is made well, and will support the 300 lbs as advertised.
The seat cushion fabric is durable and stylish. It is a little hard, but that is because the entire seat cushion is attached to a solid wood seat base. Most seat bases are simple frames. That allows the cushion to 'feel' softer, because the cushion pushes below (within) the frame, until the fabric stops the users decent. These types of 'frames wrapped cushions' are prone to premature failure, given larger people. The cushion affixed to a solid wood back board (like these chairs have) 'feels' harder, but will last longer and support heavier people, and stand up to abuse.
The base is made of steel. The steel legs (5 of them) are covered is a solid wood leg 'cover'. The CASTERS (not cheap double wheels) that support the chair are attached to a steel sleeve welded to the steel 5 leg frame. The design is very sturdy. The steel sleeves will not allow a 'blow-out' of the wheel, like a wooded leg design will. The CASTERS are perfect for rolling in ANY direction and transitioning from smooth floors to carpet / throw rugs / any pile (low, shag, etc). Casters are designed for this express purpose, and wheels are not. The cheaper wheels will rotate horizontally (on their perpendicular shaft) and get 'stuck' when transitioning to a different floor type. This will 'blow out' a wheel socket in a wood leg combination (due to the pressure on the sides of the wheels as the user 'forces' the chair to transition).
The telescopic height adjustment is a snap, and easy to use and is all metal not plastic.
The 'lock' tile feature only locks out the tile, when the chair is in the upright position (at no tile). If the chair is tilted, then the 'stop tile feature' will not engage. That is because the tile of the chair is achieved by a 'metal hinge' base, so the lockout rod needs to engage both pieces of the tilt base (when closed). if the tile hinge is open (tilted) the rod cannot engage both metal hinge pieces.
SAFETY PRO: 5 Steel legs and casters are superior to any 4 leg and wheel tilt chair. Users tend to over tile and fall 'backwards' and 'out' of 4 leg bases, but not 5 legs bases. The angles between the legs 4 legs at 90 degrees VS. 5 legs at 72 degrees, means that there is a SUPPORT leg behind the user when tilting back.. Cathy. Sevierville, TN. Tue Dec 03 2024
