Porte moustiquaire de sécurité en acier maillé perforé avec finition résistante à la rouille et porte française réversible à deux trous en blanc

very good

We ordered this door set, and the construction and ease of assembling the doors was reasonable. The two door frames are held together by a top piece with posts on each side that slide into the side frames. Things to anticipate for your mounting, are the depth of your opening. The knob and deadbolt holes are not moveable so they may conflict with your doorset. You'll need approx. 4.5 to 5 inches between doors. The frame sides are 1" each plus the width of the (2) 36 inch doors plus gaps between was 36.5 inches. ( 1 - 36.5 - 1 ) I had to add 1x4 material on my already deep frame to fill in gaps. IF and a big IF, you are expecting to keep insects out, then don't bother, I had to install windows screen on the doors using silicone and white duct tape to protect from mosquitos. Also added foam weather seal and a door sweep on each door. The center securement is a 1/2 drop rod and matching 1/2" top rod. If you have concrete/tile floor be prepared to drill 5/8 holes to catch the rods. The doorbell is simply wired through the mounting holes in back. the instruction link on the website was a 404 error no page found.