Panelled Wood Unfinished Knotty Barn Door with Installation Hardware Kit

We bought these doors to complete our office remodel and while they turned out beautiful, it was not easy getting here. First off, we weren't sent enough screws to put the doors together. I reached out to Wayfair and it took over a week for them to send me a bag of screws. Once we got them put together, the wood for the second door was warped so not only was it extremely difficult to put it together, but once you hung the doors, there was a noticeable gap when the doors were closed (see pic). We were also missing another part for hanging the doors. I reached out to Wayfair and they did make it right by sending us a new set, however a lot of the wood in that set was warped too so we had to piece together wood from each box to make a straight door. Again, these are beautiful, but it has taken us almost a month and several phone calls to Wayfair to get this done right. Next time I might pay a bit more money to skip the DIY part.

Great quality! One side is a bit bowed, but it's ok, no one can tell really.

The doors turned out great. These were the Unfinished doors after Ive stained them dark walnut and installed handles from the hardware store. To say these doors are easy to put together, or install is a bit of a stretch. The doors come as a bunch of pre cut lumber in a box. You follow the pictures only assembly instructions. A bit of skill needs to be employed so the doors are straight and square. They tell you you need long bar clamps , which I had, to put these together. The planks are toung and groove, and you need several drill bits to install the hardware. The included double tracks mount holes (( WILL NOT )) line up with your existing studs in the walls unless you are the luckiest person in the world. Having two doors insures that! After I had to Hacksaw the rails to proper length for these doors (30 each) and re-drill mount holes to align with my walls studs, install went okay. But it did take hours ! The results are what we wanted though and they work fine. Installing these for a novice with few tools should be a pass. If your experienced like I am and do have the tools it still take some time, but will be worth it. Overall quality of the rough wood package of lumber, (doors) a 7 out of 10, due to split ends, and toung and groove roughness, and absolutely no sanding being done, just saw cut. Hardware a 8 out of 10 due to the manufacturer thinking by drilling holes 16in apart they would end up where they need to be on your wall, but otherwise the hardware kit is complete. Thats my take on the double sliding doors. Have a good day.

The doors were nice but I ordered a 30 inch door and they came 31 inches. I should of measured them before I started painting but I expected to be cut right. It was a little frustrating because I will need help to cut that inch off. As a female, I don't feel comfortable cutting wood myself. Thanks why I paid the $$ to get them already cut! I looked for a number but there is no customer service line. I already painted them so I don't want to return them and have to start all over again. I spent a 3 days painting. This is a real let down to me as a non skilled carpenter.

Doors came on time and are easy to put together. Problem is that they are not the same exact size. Knots in wood keep you from being able to alter alignment for the doors to close properly .