Meuble-lavabo Harrison de 60 po de largeur seulement en blanc - bois de pin massif, tiroirs à fermeture en douceur, quincaillerie en nickel, niveleurs réglables - lavabo non inclus

All interested buyers should take note of the 3 star (he should've given less) review written by Michael. I agree 100% with his assessment. I am equally experienced at assembling furniture, and struggled with this one. This is MOST DEFINITELY NOT for the inexperienced. They fail to mention you need to drill holes to fasten the drawer slides (only 2 holes are provided). Good luck to all trying to install the drawers and get them to align and flush out. The instructions are insufficient in many ways. ALSO, the picture shows a divider between the upper and lower drawers (Michael points this out)…. the unit is supplied with a reveal on the upper drawer as opposed to providing a separate divider (this would’ve been a “deal-breaker” for me if I knew this beforehand)- see pic. This is an obvious cost savings measure by the supplier. The pegs used to align joints prior to installing screws don’t even fit snugly- see pic. You’ll spend much time trying to figure out where to install the drawer slides on the base unit- see the pic to show the correct placement (the instructions are INCREDIBLY unclear). The bottom line, I would not purchase this again. The quality is lacking and the overall feel of the vanity is cheap. Potential buyers- you were warned!

This vanity is very confusing to assemble and I have been assembling furniture systems for 35 years. The instructions are pictures of the different assembly steps. Instructions starts with mounting the drawer rails. The instructions show 4 screws used to mount the slide rail but there only 2 pre-drilled holes. The rails are different then the picture so it is confusing on which slide rail holes to use. I was able to get the rails in the correct position by assembling the entire vanity frame first, assembling the drawers next, and then installing the slide rails after determining where the drawer would slide. When the drawers are in place, I had to very carefully screw the front of the drawers to the drawer box. There are no pre-drilled holes so placement of the drawer front is difficult to center in the vanity frame. Quality of the vanity is pretty good. The paint was good but there is not protective coating. The paint will scratch easily so I will apply several coats of polyurethane for protection. The photo of the vanity isn’t entirely accurate. The photo shows a wood frame between the upper and lower drawers. There is no frame separating the drawers. It still looks ok but not what was advertised. It took me 5 hours to put it together and I generally know what I am doing.

This is absolutely garbage, I don’t recommend this vanity for anyone, it’s very hard to a simple, it’s cheap quality, fake reviews it’s cheap quality , zero star rating , it’s been three days so far, and we can’t figure it out how to put the drawer and the doors, even for free I would not want

We sent it back. Directions were terrible and misleading.

I haven’t Installed it, yet. It arrive on time in two pieces. I can’t wait to get it installed.