Sliding Classic Design Standard Single Barn Door Hardware Kit

Features

• Homer understands how frustrating it was when you opened the box and found multiple smaller tracks that were hard to line up and connect. We've got them all figured out. Track under is only 1 piece track. A track is connected by 2 tracks using a junction plate, thus, the spacing between the middle 2 holes.
• Tired of spending a hell lot of money and time when searching for the proper size and type of hardware at the big box store? Not the case here. We provide track sizes at a reasonable price. We also improved Homer's packaging to make sure you will get everything you need promptly. No more hassle to go back and forth for the missing or replacement parts.
• Do you hate to see a vague installation manual that is just one piece of paper with hard-to-read measurements, badly drawn pictures, and barely any word instructions? So am I. Fortunately, in the Homer installation manual, you will see the step-by-step instructions with USA standard fractional inch measurements, self-explanatory pictures, and concise word instructions. You are going to have a pleasant time while installing a sliding door at your home.
• We picked the most premium raw steel to make the hardware heavy-duty and sturdier than the competition. The raw steel provides the option for you to paint any colour you like and with the ability to be coloured, it will fit any room setting and leave a strong impression on your guest. The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track. Each complete track can hold door weights up to 200 lbs.
• Pre-install notices are as follows - only the hardware is for sale and doors are not included, the hardware package only has lag bolts for wooden walls or drywall. If you are installing the hardware on a concrete wall and please send us a message asking for specialized bolts, Homacer sliding barn door hardware kit is compatible with the door. If you have a thinner or thicker door and please contact us for the correct length of the bolts for the hangers. Please notify us to put spacer extensions in the package if you have thicker doors. The spacer extension will extend the track further from the wall to fit the thicker door, if you have a door trim, you'd better put a header board that is as thick as the trim and then attaches the rail to the header board, You need to have at least some space between the top of the door to the ceiling to accommodate the hardware, we use 2 hangers to hold 1 door. For a single-door kit, there will be 2 hangers in the package. For a double-door kit, there will be 4 hangers. If you have a door that is either too wide or too heavy, then you can purchase additional hangers for that door, all tracks that are under coming in one piece. All tracks that are above are connected by two tracks using a junction plate. Thus, the spacing between the middle 2 holes is. The track is connected by 3 tracks and the track is connected by 3 tracks.