Two Solid Pine Wood Unfinished/Unassembled Barn Door with Black Single Track Bypass Hardware Kit

Features

• The direction of how your door opens depends on the placement of the track. It can open in any direction, you would just need to shift the track over the side of the wall you want the door to slide.
• You will need two 28" wide doors.
• Premium black rustic carbon steel, heavy-duty, total door(s) weight up to 220 lbs. High-quality nylon wheels ensure minimal noise.
• Track 8ft and under is only one piece track. For the one piece bar, the spacing between two mounting holes is 16 inches. Track 9ft and above are connected by 2 or 3 tracks using a junction plate, so the spacing between the holes where the bars connect is not 16 inches, and a header board is needed.
• You need to have at least 6" of space between the top of the door to the ceiling to accommodate the hardware.
• Two hangers are used to hold one door. For a single track bypass kit double door kit, there will be four hangers in the package: 2 flat & 2 bent. If you have a door that is either too wide or too heavy, then you can purchase additional hangers for that door.
• IMPORTANT: for a single track bypass system with regular roller designs, there will be an inevitable overlap between the two doors when you slide them apart. The overlap is about 6 1/4”, which would shorten the overall coverage by the two doors. For example, if you have two 40” wide doors, the actual coverage that they can achieve will be 2x40”-6 1/4”=73 3/4”, and not 2x40”=80”. Please take this into account before purchasing!