Red Oak 8.92' 8-Step Wood Rolling Sunburst Wheel Ladder

Features

• Library ladder with rail kit includes 2 upper assemblies, 2 bottom wheels, 8 step supports, track mounting brackets, (2) 6 ft. Of rail (total of 12 ft. Of rail), 2-rail end caps, and all required fasteners. PLEASE NOTE: If ordering the brushed satin brass hardware, you will receive four of 3ft. Sections of rails (total of 12 ft. Of rail) with the rail connectors.
• The centre of the rail must be mounted at 102 in. H (from the floor)
• 107 in. x 16 in. unfinished ready-to-assemble ladder can be painted, stained, or left as is to coordinate with your décor
• Ladder hardware system features exclusive braking wheels that utilizes a spring to lock the wheel which prevents the ladder from moving left or right when a user steps onto the ladder, the break activates at appx 125lbs and can be adjusted down to 70lbs on site.
• The ladder can be stored on the railing when not in use
• PRO TIP: The ladder in the stored position is 7 in. from the centre of the rail to the top of the ladder, when the ladder is in the climbing position there is 3 in. from the centre of the rail to the top of the ladder
• In the climbing position, the ladder's rolling wheels are approximately 28 in. from the wall
• Looking to add additional ladder rail kits? The following options can be ordered: RBCS1116 (QG.4006-202) and QGLI1092 (QG.41 rail connector). PLEASE NOTE: Order Sku number RBCS1117 (QG.4003-202.06B) for Brushed Satin Brass additional rail kits