Instant Grab - Ceiling Tile, Wall Panel and Crown Moulding Water Based Adhesive (Ensemble de 2)

Features

• Instantly bond
• Caulking gun needed to apply
• Use on with decorative ceiling tiles and wall panelling
• 10 x A La Maison ceiling tiles per tube
• 6 x seamless eps wall panels per tube
• Akfix #310, is a quick-grab formula that provides a high-strength, heat and water-resistant bond to a variety of substrates
• Properties: Interior and exterior. Excellent adhesion. Instant grab. Weatherproof. Paintable. Solvent-free. Low odour. Water clean-up.
• Applications: recommended for any kind of wood construction decorative panels, drywall, gypsum, brick, concrete, tile, wood, plywood, treated lumber, plaster, ceramic, PVC, cork, vinyl, masonry, glass, non-polished, stones, polystyrene, aluminum, and metal. Remodeling projects filling gaps and cracks.
• Instructions: The substrate must be dry clean, and free of grease. One of the surfaces must be poured into the province at a faster curing rate. Application temperature must be between+5 c (41 f) and 35 c (95 f). Apply the adhesive to the edges and corners of the materials to be bonded. Press the materials together and fix them properly. The materials can still be moved immediately after bonding. It may be required to provide support during the setting. As long as the adhesive has not been fully cured, it must be protected against water and moisture. The excessive adhesive can be cleaned with water if it has not been cured yet. Not suitable for areas that are constantly exposed to water.
• Not recommended: It does not bond mirrors as one surface must be poured