Support d'ordinateur 2 écrans d'ordinateur

Great product and once setup it is very easy to use. Looks good on the desk also. I got a little scared when one of the screws fell out of the bag, but I eventually found it in the box. My desk has a slight bezel which causes the mount to move a little when turning the main support arms. However, these arms do not need to be moved once in place, the gas shocks and swivel take care of the fine-tuning placement of the monitors. My only suggestion is that there are two screw clamps instead of one or a bracket that I can screw into my desk with 4 mounts instead of one giant screw. For reference, I have two 27" curved monitors.

I wish the last Section of arm behind the monitor was adjustable in length. The monitor comes out too far from the back of the desk. This is even after rotating the bottom outward. But it will work for me for now.

This monitor mount is much better than our old one. With our old one, you have to move the assembly up and down a pole and it tightens with an Allen wrench. This one adjusts in about any configuration you want. I bought this one for another employee because I like mine so much.

A solid mount, with a good clamp, hefty base, tight tolerances, and well-engineered pivots. There is some give in the final coupling between the arm end and the VESA bracket due to the quick disconnect, but it's taken up and damped by the disconnect's spring, and only really manifests itself if you're rotating the monitor between portrait and landscape. Plenty of lift in the gas cylinder to fully counterbalance a 14 lb LCD TV plus cables, after adjusting the preload and tilt screws.

Fantastic arm mount. Have a 32 LG 4K monitor weighing almost 20 pounds on it. Install was easy with the clamp but I decided to use the grommet for extra security. Adjustments to arm are easy. Don't listen to the other reviewers that say it won't hold their monitor up... they didn't take the time to adjust it.