Gorgeous lights!!! 28 mins to put on crystals!

This is a stunning light with an inner ring of crystals and an outer ring of crystals. It uses candlelebra E12 bulbs which are readily available. I used LED bulbs. Crystals must be hung individually by inserting a thin yellow gold color metal wire through the hole at one end of the triangular crystal. Bend the wire on the back to secure, then put the other end of the wire through the hole on the round chandelier frame. Bend the wire to secure. The chain is 38 inches long, but can be shorten. The chain has a convienent link on each end that unscrews to open the link to attach. Generally, space between a dining table and light fixture is 30-36 inches. The electrical wire has a clip to attach, but if you have an older traditional ceiling light setup, the clip can be cut off and wires attached to the ceiling wires. A cloth is included to cover the electrical wires before threading through the chain. I didn't use it. Two gloves were included to use to keep finger prints off the crystals. I washed my hands thoroughly and didn't have finger prints. Once you receive the box, check to make sure the frame is not bent. Unwrap and check the crystals. I received 2 shattered crystals and 6 chipped crystals. Called customer service and a new package of crystals was quickly sent. They did request photos to be upload. I took photos and edited each photo, using a red line to circle each area of damage because it is hard to photograph damage on clear glass.