Support mobile portatif 16U (H 21 po x l 34,3 po x P 19,7 po)

No so good. Hard to assemble. Ending up throw it out.

I bought 2. The first one had bent metal parts I was able to straighten and assemble it. The second one I assembled more than 30 days later (I work for a living). My attempt to get a resolution on the fact that the second one emerged from the box with an unrepairable manufacturing error went nowhere on account of the 30 days limit. So I got screwed. Good luck! jg

A little wobbly, as there's not lateral reinforcement until you get it at least halfway full of gear. I would trust these to roll around a lot, but for stationary use, at this price, they can't be beat.

First of all, the rack rails ARE NOT STANDARD rack rails. I would not even call them rack rails. This is critical to know. Because of the limitations of the "rails", the only way to mount racks is to use the hardware nuts and bolts... the nuts have a clip encasing it, then you that you need to mount the nut with the clip in the square holes, then you put your equipment on top of the nuts then screw the bolt into the mounted nut. Secondly, because of this limitation, they only give you enough hard ware to place five pieces of equipment in the case. So if you have single space rack equipment, you have about ten spaces left to fill...oh but you can't because your limited to the their hardware which is specifically designed for this so called rack rail system. Try going to a hardware store to find more hardware for this unit. I made the mistake buying this thing and wasted a 100 bucks. Unless I can find similar hardware, I'll likely be pitching it. Save your money and buy something that has your standard rack rail.

El envío es pésimo, FedEx no tiene explicación y dejo el artículo en sin leer las especificaciones