Cordaville 12 Ft. W x 12 Ft. D Vinyl Pergola

Transform your outdoor space into your oasis with the Regency pergola. Whether you are relaxing or entertaining, the Regency will add instant charm and functionality to your yard or patio. Crafted from premium weather-resistant vinyl, the Regency pergola is maintenance-free and built to last. Simple to assemble and install and comes with a 20-year limited warranty against manufacturing defects.  Tools Required: Cordless drill, rubber mallet/hammer, level, tape measure, step ladders (2), shovel, cement (for in-ground installation) Approx. Time Commitment: 2 people, 8-10 hours Please Note: Additional materials are required for installation and must be purchased separately (please review the assembly guide for more information). If mounting pergola onto an existing concrete patio or deck (Note: not intended to be installed on top of patio stones or pavers): · Bolt Down Bracket System (Item Code: VA80206) · Pressure-Treated Wood Posts (2) – 4x4x7’ (10.2 cm x 10.2 cm x 213.4 cm) · 2x6x6’ Pressure-Treated Wood Boards (2) · 2x6x12’ Pressure-Treated Wood Boards (2) · 2x6x14’ Pressure-Treated Wood Boards (6) – to be cut to 12’6” (381 cm) · Wood Shims (16) – ½” x 3 ½” x 12” (1.3 cm x 9 cm x 30.5 cm) · Cement Screws, Countersunk Head (6) – ¼” x 2 ¾” (0.64 cm x 7 cm) · Concrete Drill Bit (1) – 3/16” (0.48 cm), min. 3” long · Lag Screws with Washers (6) – 3/8” x 3 ½” (1 cm x 8.9 cm) · Lag Screws (for wood wall) or Anchor Screws (for brick or concrete wall) (6) – 3/8” x 3 ½” (1 cm x 8.9 cm) *used to mount ledger board onto supporting structure If mounting a pergola onto a deck with an accessible underside: · Bolt Down Bracket System · Pressure-Treated Wood Posts (2) – 4x4x7’ (10.2 cm x 10.2 cm x 213.4 cm) · 2x6x6’ Pressure-Treated Wood Boards (2) · 2x6x12’ Pressure-Treated Wood Boards (2) · 2x6x14’ Pressure-Treated Wood Boards (6) – to be cut to 12’6” (381 cm) · Wood Shims (16) – ½” x 3 ½” x 12” (1.3 cm x 9 cm x 30.5 cm) · Bolts and Nuts, Countersunk Head (6) – ¼” (0.64 cm), length depends on blocking material · Washers (6) – ¼” (0.64 cm) · Wood Drill Bit (1) – ¼” (0.64 cm), min. 3” long · Lag Screws with Washers (6) – 3/8” x 3 ½” (1 cm x 8.9 cm) · Lag Screws (for wood wall) or Anchor Screws (for brick or concrete wall) (6) – 3/8” x 3 ½” (1 cm x 8.9 cm) *used to mount ledger board onto supporting structure · Wood Blocks (2) – 2x10” (5.1 cm x 25 cm), to be secured between deck joists If installing a pergola in the ground: · Pressure-Treated Wood Posts (2) – 4x4x10’ (10.2 cm x 10.2 cm x 304.8 cm) · 2x6x6’ Pressure-Treated Wood Boards (2) · 2x6x12’ Pressure-Treated Wood Boards (2) · 2x6x14’ Pressure-Treated Wood Boards (6) – to be cut to 12’6” (381 cm) · Concrete Ready Mix (2) · Lag Screws with Washers (6) – 3/8” x 3 ½” (1 cm x 8.9 cm) · Lag Screws (for wood wall) or Anchor Screws (for brick or concrete wall) (6) – 3/8” x 3 ½” (1 cm x 8.9 cm) *used to mount ledger board onto supporting structure.