Serre en polycarbonate 6 x 8 pour l'extérieur noir

We had a windy day - not tornado, just a normal windy day- and not only did it fly across my patio, the supports are all now bent beyond salvaging. Even if the greenhouse had been anchored down (which there is no way to do) the window panals all blew out of even the unbent supports. To begin with, the directions are vague. Pieces are needed later in the process that are not mentioned until you need to attach a support to it and quite a bit of deconstruction is needed to go back and add it in (specifically the screws that attach everything to the frame) Some of the basic structrual screws align at a right angle in such close quarters, you can't fit the pieces they are suposed to attach together and can't tighten the screws. This is within the first framing steps of the base which leads to squaring issues, it falls apart as you are building if each corner is not supported the entirety of the build time until upper supports are added near the end of framing. I would not recommend this greenhouse, especially if you are not used to assembling and if tou live anywhere with a breeze

Hard to build. did not last even a season, everything collapsed after wind day.

Awful product. Poor construction. It arrived with the box ripped open and most of the frame had to be bent as I built it. It is so incredibly poorly made. I cannot begin to express how awful the assembly process was. Everything is assembled using a channel system and the bolts just slide around, dont fit properly or, are butted up against another so you cannot tighten. As others have said alot of back tracking has to be done to assemble. Structure has no integrity. I can move the whole green house with one finger and that is with it screwed down to a deck with 3 inch decking screws. I have serious doubts that it will make it through a single storm. Save your money. Build a green house from sticks and trash bags and you will be better off than with this Chinese garbage. Zero stars should be an option.

This greenhouse was too difficult to assemble. The directions only provided pictures, there was no video online, and the placement of the nuts and bolts at the foundation made it impossible to tighten with appropriate tools to ensure the integrity of the structure.

SO HARD TO BUILD ,end result was nice