Taille:
28 po x 80 po
Livraison gratuite
Recevez-le entre le 25 juin-29 juin
à
M4C 1B5

Type d'installation de la porte: Pliable / pliable en deux
Peut être raccourci
À propos de ce produit
Qu'est-ce qui est inclus?
Caractéristiques
Dimensions du produit

Autres dimensions
Détails
Garantie
Documents
Pas convaincu? Les retours sont offerts pour la plupart des articles dans les 30 jours suivant la livraison pour un remboursement ou un bon d'achat.
Apprenez-en plus

Accumulez {RICH_TEXT_POTENTIAL_REWARDS} en récompenses, avec une remise de 5 %¹, en plus d’autres avantages exclusifs.
Noté 4.4 sur 5 étoiles.
Avis 1-5 de 7
Noté 5 sur 5 étoiles.
Ça c’est très bien passé
Noté 5 sur 5 étoiles.
One of the panels was broken. A replacement was sent. Customer service was excellent in helping. The door is BEAUTIFUL!
Noté 5 sur 5 étoiles.
Wow these are very classy and super functional! Client needed for an interior Juliet balcony situation. Contractor primed and painted it to match all our trim - stunning
Noté 3 sur 5 étoiles.
I am on the fence. They are decently built and solid material. The instructions are lacking some detail which make it a little more difficult to put together. Unfortunately, the measurements were not quite correct so the doors do not fit so we will have to cut them down to get them into our door frame.
Noté 4 sur 5 étoiles.
Reviewing a 60x80 door. Good doors for the price. Leaving some comments that may help the next person. 1. In step 3, mount hinges, you need short screws, and 16 of them. Only 8 came with the package so I had to use my own. 2. Step 5, hang doors, Rotating the nylon arm to seal the door is definitely a 2 person job. One person needs to hold the door while other seals it to the upper pivots with correct angles. 3. I didn't realize earlier but the lower jamb doesn't support any weight. It's only as a pivot to the lower side. 4. Lower jamb tip: Install only one screw (the one where you get some vertical play). Then test the door sliding properly WHILE THE JAMB IS SECURED IN PLACE. Someone needs to hold the jamb while door sliding is tested. In my case, it was working fine with one screw (maybe because the jamb had some play) but when I put all three screws, the door would pop out. I had to redo the lower jamb. Only when the door is sliding while the lower jamb is stationary all the way through door sliding is when you put the remaining two screws. Overall it was a fun little home project.
Noté 4.7 sur 5 étoiles.15 votes au total
Noté 4.5 sur 5 étoiles.95 votes au total