Support d'aquarium de 55 à 75 gallons avec prises de courant

It’s ok. Assembly was straight forward enough. It helps a lot to have a screw gun with the right attachment rather than manually setting all the screws. That said, I had to get some longer screws for a couple holes for the top that were too deep. Most important callout is that while it does say it’s good for 55-75 gallons, I would have thought it could therefore hold a 37 gallon tank. I’m attempting to put a 30 inch wide tank on top. First, I put it all the way to the left where it would be supported directly by two of the metal legs. However, the stand bowed significantly in the middle when I did this. I drained the tank and moved it all the way to the right side of the stand. Now it’s supported by two legs and the legs support either end of the tank. Anyway, the point is if you try to put a smaller tank on top you may not be able to center it, depending on the dimensions of the tank.