Wall ovens are useful and large scale appliances many kitchen aficionados dream of. If you are considering purchasing your own, you will need to ensure that it fits your space and compatibility needs. Picking the right spot and getting your measurements right before you shop will make installation a breeze.

Tip!

To learn more about picking the right wall oven for your needs, read Wall Oven Sizes: Pick the Right One for Your Kitchen and How to Choose the Best Wall Oven: Wall Oven Sizes, Types & More.

How to Measure for a Wall Oven

Once you have selected the exact wall oven for your needs, you will need to prepare for the delivery and installation to ensure the entire process goes off without a hitch. Follow these steps for a smooth process.

Step 1: Walk the Delivery Path

First, measure any doorways, hallways, stairways, and areas where there may be a tight fit along the path you'll need to bring your new appliance through on delivery day. This step will ensure you don't have any trouble getting your new wall oven to its installation location.

Step 2: Measure Your Existing Unit

Wall ovens typically come in a few common widths, but the part that sits inside your wall varies in size from model to model. To get the right fit, you'll need to measure the dimensions of your existing unit and the space in your wall where your new appliance will sit.

• You should begin by measuring your existing oven so you can compare those specs to the model you want to purchase.
• If you don't have an existing wall oven, make sure to measure the place you intend to install the new one to make sure it will fit. There should be around three inches of extra space on all four sides for a correct fit.

Step 3: Check Fuel Type

Make sure you have a compatible electrical outlet or gas connection within the range of where you’ll install your new appliance.

Step 4: Measure Your Installation Space

Next, you need to measure the space you intend to install the oven in. To do so, first unplug the unit and turn off any gas. Then carefully remove your existing wall oven (you may need assistance for this).

• Now you are ready to measure the oven installation space.
• Start by measuring the inside of the cabinet opening.
• Next, measure the height from top to bottom.
• Measure the depth from back to front.
• Finally, measure the width of the narrowest section from side to side.

How to Install a Wall Oven

If you are replacing an existing wall oven, it will need to be removed to install your new one. You can remove your oven before delivery or opt in for Wayfair’s haul-away service. With haul-away you don’t need to worry about disposal of your old model, it will be removed and disposed of on the day of delivery.

• To opt into the haul-away option, simply select the 'add haul-away' under additional services once you have chosen the wall oven you want.

Get Ready for Installation

To get your new wall oven up and running, it’s crucial that you get it correctly installed. While it is possible to DIY installation it’s important to remember that wall ovens can be very heavy and hookup is complicated. You can opt in for Wayfair’s installation service and the process will be entirely taken care of by professionals on the day of delivery.

• Just like with the haul-away service, you can add this installation service before you checkout and pay for your new wall oven.
• Prior to this service, you'll need to fully disconnect your old appliance from any water and gas supply lines, and move it away from the surface it was attached to.
• Note that installation can only be provided if you have a power source and appropriate plumbing available
• Additionally, the number of appliances serviced cannot exceed the number of appliances purchased.

Now you know how to measure for a wall oven, you can follow the simple steps above before purchase to help make the installation and delivery process of your wall oven a breeze! Enjoy your new appliance!

You Might Also Like: