Support de rangement pour le garage, 4 pi 4 po

We had 2 similar items when we lived in VA and thought they were fantastic. So when I saw them on Wayfair at a reasonable price I ordered 2. Price was much better than other places. So I put one together and installed it. The cardboard template was very awkward to use, I simply used a measuring tape when I installed the second one. Back to the first. Got it installed, when winding up the cable tends to run over on itself so my solution was to load it up with 4 cases of water while it was on the floor and slowly crank it up. Every couple of turns I would go up the ladder and straighten the cables so they laid flat next to each other. Got it up to the ceiling and left it there for 3 days so the cables would get a"set". Cranked it down, took the water off and put the items to be stored on it. Went up nice and smooth, cables straight. Unpacking the second one was also straight forward but I noticed that except for one item all the zip ties had been cut and were laying there loose. When I got to the hardware bags every one of them had been cut open and a piece of tape fitted over to seal them. One bracket had the nuts screwed on it. I'm thinking that possibly this had been a returned item. All the parts were there, there were no scratches or anything and it looked in as good a shape as the first one. Just that the packages had been opened. Overall I'm very satisfied and recommend the item.

Product is great, does exactly as mentioned in the AD, however instillation is a bit hard takes way longer than you expect to install.

Good product quite straight forward to install especially if you know where and which way the joistsstuds run. I highly recommend having the bit attachments to raise and lower it with a drill it take a while by hand.

Sturdy products, holding our items safely in our garage. Happy to have the floor space back.

I bought this Overhead Garage Lifting Storage Rack to provide extra storage in my garage for my Christmas decorations so that I no longer had to climb a ladder and lift heavy boxes into the rafters. The unit came quickly after I ordered it. Below are my thoughts in a PROS and CONS format: PROS: • The frame is much more solid that I anticipated. It assembled quickly and easily and seems very capable of handling my needs. • Likewise, the pulleys themselves are mounted on a solid plate that attaches to the joists via 4 lag bolts each. • If you are mechanically inclined, the assembly seems to be straightforward, even with the lack of written instructions. (see the CONS below) • All parts are labeled in separate bags and even included one extra part in each bag. • It raises and lowers smoothly. CONS: • The directions lack written instructions and rely on drawings to figure out the assembly. For example, it would have been nice to list the size of pilot hole to drill for the lag bolts. • The cardboard template is way too flimsy to hold up in place for one installer. • The lag bolts are of terrible quality! Of the 24 bolts required for the four pulleys, 8 of them broke while trying to tighten them! I highly recommend that you head to your local hardware store and buy new, quality bolts before starting this project. • When using a drill/driver to raise and lower the platform, the end of the rod needs to be longer to tighten into the chuck better because it keeps slipping out. All in all, I think this product will work well for the few times a year I will be lowering and raising it. I give it 4 out of 5 stars.