Tiroir en bois coulissant à fermeture en douceur pour armoire de cuisine CabinetRTA (sans poubelles)
First time assembling a cabinet drawer and installing. I needed these because for some reason my trash can pull out drawers were not installed with wood pullouts and soft-close undermount hardware. These fit my 18" wide cabinet perfectly and after some trial and error on the first one, it became straightforward and easy. Some tips: watch which way is up when fitting the back plate. It matters as the drawer slides won't have room if you assemble it upside down. The insert that is meant to hold the trashcans is designed for narrower cans that I have (although still 13 gallon ones), so some trimming using a jigsaw maybe required. If you learn this after you assemble the cabinet, you can un-assemble it easily. USE A MALLET and not a hammer to put these together, or use something between a hammer and the cabinet. You would damage it easily otherwise. Getting the rails in place in the right location takes a bit of trial and error. Measure twice before drilling and DRY FIT your drawer with the slides to make sure you're putting the rails in the right location. I had to drill other holes than the pre-drilled ones in the supporting wood pieces as I needed the drawer to protrude more. These are great but will take some time to get right. Just take your time and it all works perfectly.. Anthony Norris. Tupelo, MS. Sat Jan 17 2026
