Features

• Featuring an ultra-thin wall design that is only 3/4" thick. Offering a sleek modern farm sink look.
• Heat resistant up to 350' F. This sink has been tested and will not crack due to heat exposure from a pot/pan up to 350' F.
• This sink is constructed of solid high-grade fireclay material using high-pressure casting, ensuring durability, longevity, and resilience to acids, alkalis, scratches, and chipping. The glazing of the sink surface provides both durability and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finish.
• Capable of being installed via under-mount (countertop Over edge of sink), top-mount (countertop lower than the top edge of sink), or flush-mount (countertop even with sink).
• Standard 3 ½” centre drain and can be used with a garbage disposal.
• Due to the organic nature of the fireclay, material dimensions may vary by 1/8" of an inch. We recommend having the sink on location to trace and measure for countertop and cabinet cut-outs. Furthermore, minor imperfections may appear. These are not defects; this is what makes each sink uniquely its own. Defective sinks will not pass our quality control inspection and will be recycled into a new sink at the factory.
• It is required to support the sink from beneath. You can use the undermount installation kit (Model #: ABUMSB) to the inner sidewalls of your cabinet. We then recommend putting plywood on the rods to create a large smooth flat surface. Drill the necessary drain holes. If you did not purchase the kit you will need to create a custom support using 2x4's.