Remy 8" x 8" Cement Spanish Wall & Floor Tile

Features

• Symmetric design and patterns offer flexibility in decorating your space
• Clean the seal before installation and again after grout
• Use only non-sanded grout with this product. All spills must be cleaned immediately to prevent staining. Dark grouts are not recommended with light tiles. Light grouts are not recommended with dark tiles. These tiles are handmade and subject to colour variation. Mix randomly from different boxes to balance variation. Wet the back of the tile prior to setting. Apply thin-set to both the substrate and the back of the tile using a notched trowel. The tile pattern displays best with 1/16" to 1/8" grout joints. Wider joints are necessary for wet areas or when using floor heating cables. Tiles must be sealed prior to grouting to prevent penetration. Miracle Sealants 511 Porous Plus sealer is recommended before and after grouting. Tiles must dry for at least 24 hours before grouting. Any excess grout must be wiped from the surface of the tiles immediately and meticulously. Other options for post-grouting sealants include DryTreat Stain-Proof solvent-based sealer (does not enhance tile colour) or DryTreat Intensifia non-solvent-based sealer (enhances the tile colour). Exterior installation requires re-sealing every 2-3 years. Merchandising materials and samples are for general reference only and are representative of a product's potential characteristics. Tile is subject to variation in colour/shade, size, texture, and finish. Field, mosaic, and trim tile may not match exactly. Blend tiles from different boxes to achieve consistent shade distribution. The installer and end-user must conduct a dry mock layout under proper lighting conditions to inspect the product. Installation constitutes acceptance of the product. Reference the TCNA, ANSI, Manufacturer's specifications, and Bedrosians Care & Maintenance Guide. Improper installation, application, use, care, and maintenance voids warranty. We reserve the right to make product changes without notice.
• Glass and Decorative tiles are extremely beautiful for backsplashes and other wall applications. To remove hard water spots on glass, use a very mild acidic cleaner, washing off the cleaner immediately.