Urban 2.0 12" x 24" Porcelain Stone Look Singular Tile
See More by Bedrosians
Urban 2.0 12" x 24" Porcelain Stone Look Singular Tile
See More by Bedrosians
Ship to:
What We Offer
Quick-Ship Samples
Order a sample to see and feel the product before buying.
Product Overview
Floor Use
Shade Variation: V3 Moderate Variation
Don’t be stuck in the stone age and advance with this stone-look tile. Keep the classic stone look while simultaneously moving on to a more modern porcelain material. The porcelain material allows applications in places where stone would normally not be suitable such as countertops, shower floors, and pools without forgoing the desired stone look.
Features
- Ink jet: Yes
- Post recycle: Yes
- Glazed-colour body porcelain: Yes
- Certified porcelain tile
- US green building council member
- Porcelain tiles have low porosity, are extremely durable, and are low maintenance. Polished and honed porcelain tiles require the use of an impregnating or penetrating sealer prior to grouting, otherwise, grout release must be used. Common household spills are easy to clean with the use of a mop, warm water, and a pH-neutral cleaner. Acid-based cleaners and harsh chemicals should not be used.
- Images and product samples are representatives of a product’s potential characteristics. There is no guarantee that the sample product or images will 100% match the product received. Field and trim tile may not be an exact match. We reserve the right to make changes to product specifications at any time without notice. Tiles are subject to variations in colour, shade, sizing, surface texture, and finish. Prior to installation, the installer must blend tiles from several different boxes to achieve an even distribution of colour range. The installer must conduct a dry mock layout under proper lighting conditions prior to installation. It is the consumer’s responsibility to inspect the product prior to installation to ensure satisfaction. Once installed, the product is deemed accepted. Reference the most current TCNA handbook, ANSI, manufacturer's specifications, and the Bedrosians®' care & maintenance guide for installation, outdoor use, care, and maintenance information. Improper installation, application, and/or use voids warranty. For installation of all polished ceramic/porcelain, polished glazed ceramic/porcelain, and all honed ceramic/porcelain tiles, the manufacturer requires the use of a grout release or sealer prior to grouting. The manufacturer also requires the use of a grout colour that matches the predominant colour of the tile. Do not use acidic cleaners on polished ceramic/porcelain, polished glazed ceramic/porcelain, or honed ceramic/porcelain tiles. The maximum allowable installation offset is 33%. The minimum grout joint must be 3/16 inches. Please refer to the most current TCNA handbook. The manufacturer strongly recommends the use of a levelling system during installation.
- Breaking strength: Greater than 250 lbs.
- Water absorption: ≤ 0.5%
- Chemical resistant: Unaffected
- Note: Do not dry-cut porcelain or ceramic tiles when installing due to the potential for exposure to silica dust. Use a wet saw or a score and snap tool when cutting.