Beware- first and foremost this is incomplete. It does NOT come with a control switch/valve which I think is ridiculous that you need to buy separately. Its a sly way of making it cheaper. A little deceiving unless you read the small print.

Looks great and works really well! This was easy to install. Even came with the teflon pipe thread tape. I wish they had noted the wrench sizes needed in the instructions so I could have prepared. I ended up using a pair of vise grip pliers because it needed two different fairly large metric wrenches. The reason this was important for our use is that the selector switch is at the bottom of the vertical rod. That makes it easy for my short wife to control. The main and upper connection comes with an adapter if your fitting is in a hollow wall as was mine or you leave the adapter off if your fitting is flush with the wall surface. The bottom can mount three different ways. It has a suction cup mount which didn’t work for me because the tile grout lines were right where it needed to be. If you do use the suction mount, you press it against the wall and then rotate the ring that then pulls back on the cup to make a strong seal. You can screw a circular plate to the wall or use the double stick tape fitting which is what I did. You can angle the rain or let it just come straight down. Do note that it does not include a water temp or flow control valve which feeds the water to the upper fitting. This was a nice upgrade!

Okay. But could have had more water pressure.

Good looks and functional...but finding it a hard time to get every joint secured and tight.

This paired with an oval tub, spectacular guest bathroom!