Mini Black Rustic Classic Design Single Track Bypass Two Door Hardware Kit For Cabinet Use

Features

• Barn door hardware installation: In the installation manual, you will see the step-by-step instructions with USA standard fractional inch measurements, self-explanatory pictures, and concise word instructions.
• It can be used for various purposes such as a TV stand door, vanity door replacement, cabinet renovation, an add-on to your pet’s kennel, a bookshelf closet, and so on!
• The most premium carbon steel makes the hardware heavy-duty and sturdier. The powdered coating makes the paint stays forever and will not be scratched off. The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track.
• Track 24", 30", 36", 39", 42", 48", and 60" consist of only one piece track. For the one piece bar, the spacing between two mounting holes is 16 inches. Track 54", 66", 72", 78", 84", 90", 96", 102", 108", 114", and 120" are connected by 2 or 3 tracks using a junction plate, so the spacing between the holes where the bars connect is not 16 inches.
• You need to have at least 4" clearance to accommodate the hardware.
• Two hangers are used to hold one door. For a single track bypass kit, there will be four hangers in the package: 2 flat & 2 bent. If you have a door that is either too wide or too heavy, then you can purchase additional hangers for that door.
• IMPORTANT: for a single track bypass system with regular roller designs, there will be an inevitable overlap between the two doors when you slide them apart. The overlap is about 4 5/8". Please take this into account before purchasing!