Metal Register

Features

• Designs/pattern: Freshen up the look of your home with stylish and attractive decorations. Tudor mushroom design comes with a choice of colours and sizes. This pattern is available in matching air return grills and over 50 sizes available. It will add beauty and a rich look to any of your traditional, old contemporary homerooms. It, made by skilled craftsmen, offers a beautiful contrast with your flooring, whether carpet, tile, or wood! It comes in cast aluminum also.
• Floor register: The faceplate sits 7 mm above the floor level. It has pre-attached steel dampers at the back to adjust airflow dampers that can be removed if required. This VR100 model has beveled edges so it can be blended with any floor as a drop-in register mount.
• Finishes: Comes in a variety of finishes to match any décor. It is made of cast Iron rust-free material, the baked-on powder coat fine grain matte finish provides extra protection that lasts long, and can be re-painted using metal spray paint of any colour to match your décor.
• Easy to install: It is very easy to install and maintain for any homeowner. Just drop it / insert it into the duct opening of the floor. No tools are required, and floor registers can be installed on walls and ceiling. We provide counter sunk holes and matching screws, select holes or no holes as an option while placing an order. The dampers can be removed easily from the back of the vents. The floor register face plate sits above the floor surface, it does not flush with the floor.
• Listed product sizes refer to the duct opening measurements, and the outer dimensions of the cover faceplate, in most cases, are 1" or longer on each side/direction.