Showing results for "drop box with combination lock"

• Components of this mailbox lock are constructed of diecast, brass, steel, and stamped steel materials
• Steel components come finished in a corrosion-resistant, zinc plated finish and the cylinder face comes in a nickel-plated finish
• Designed for use with mailboxes manufactured by Jensen General locks
• Includes installation fasteners, instructions, and two keys
• Easy to install with only a few simple tools

This mailbox lock is made from diecast metal and comes plated in nickel. It features a counterclockwise, 5-pin tumbler, with plated steel cams. This lock is designed so that your key may only be removed when it is in the locked position. No tools are required for installation. To install this lock push it through the hole and clip it from the other side.

• Nickel-plated diecast construction
• Constructed from diecast metal with a nickel-plated finish
• Spring clip installation
• 2 Keys are included with each lock
• Easy to install with a few simple tools

This mailbox lock is constructed of diecast and comes with a chrome-plated face. A security feature of this lock prevents the key from being removed when in the unlocked position, this feature assists in preventing the mailbox user from failing to lock the mailbox, prior to walking away with the key. It includes a total of 9 zinc plated steel cams, brass pins, a spring steel locking clip, and 2 keys. To unlock this mailbox lock, the key must rotate 90 degrees in a counter-clockwise direction. Replaces many original manufacturer's locks, and it is used by many. Uses ILCO 51064A (NA14) as used by National Keyway, and it is keyed differently from others.

• Components of this mailbox lock are constructed of diecast, brass, steel, and stamped steel materials
• Steel components come finished in a corrosion-resistant, zinc plated finish and the cylinder face comes in a nickel-plated finish
• Designed for use with mailboxes manufactured by American, Florence, Miami-Carey, Bommer, and Auth.
• Features a selection of locking cams and two keys
• Easy to install with only a few simple tools

This multi-purpose mailbox lock is constructed from diecast and has a nickel-plated face and cover. It features 5 brass pins, zinc-plated steel cams, 2 keys and a spring steel-locking clip. Replaces locks on mailboxes manufactured by American Device. Its direction of turn to open is counter clockwise at 90-degrees, and its cam position locks pointing to the left. Features a Hudson keyway, and the key blanks that fits this lock are ILCO 1003M. Mailbox locks like this one will not allow the user to remove the key until the mailbox has been closed and locked.

• This is multi-purpose mailbox lock replaces original locks provided by various manufacturers
• Key will not remove in unlocked position which prevents user from forgetting to lock mailbox
• This lock replaces mailbox locks
• The face of this lock comes in a bright nickel-plated finish
• The spring steel locking clip included with this mailbox lock can insert onto the cylinder housing in one of two slotted openings

This mailbox lock is constructed from diecast. It features a nickel-plated face, brass pins, and a spring steel locking clip. These multi-cam assortments can eliminate the stocking of individual locks.

• Used as a mailbox lock replacement
• Spring steel locking clip
• Counter-clockwise rotation
• Diecast construction with a nickel-plated face
• Can eliminate stocking of individual locks

This mailbox lock is constructed of diecast and comes with a chrome-plated face and dust cover. A security feature of this lock prevents the key from being removed when in the unlocked position, this feature assists in preventing the mailbox user from failing to lock the mailbox, prior to walking away with the key. It includes a total of 5 zinc plated steel cams, brass pins, a spring steel locking clip, and 2 keys. To unlock this mailbox lock, the key must rotate 90 degrees in a clockwise direction. Replaces many original manufacturers' locks, and it is used by many. Uses the National-14 keyway.

• Components of this mailbox lock are constructed of diecast, brass, steel, and stamped steel materials
• Steel components come finished in a corrosion-resistant, zinc plated finish and the cylinder face comes in a chrome-plated finish
• For further dimensional and specification information, please see the line drawing

This 5-pin tumbler lock is constructed of diecast and comes with a nickel plated face and dust cover. A security feature of this lock prevents the key from being removed when in the unlocked position. This feature prevents forgetting the key in the lock, while at the same time ensuring the mailbox is locked every time. It includes a total of 5 zinc plated steel cams, brass pins, a spring steel locking clip, a dust cover to protect the internal pins and springs from dust and moisture in exposed exterior conditions, and 2 keys. To unlock this mailbox lock, the key must rotate 90 degrees in a counter clockwise direction.

• 5-Pin tumbler mail box lock
• Uses Hudson keyway
• Counter-clockwise rotation
• Spring steel locking clip
• Can eliminate stocking of individual locks

This is a 5-pin tumbler mailbox lock for Dura-Steel. Constructed of diecast Zamak cylinder with nickel-plated face, brass pins, plated steel cams, and spring steel locking clips. It replaces Dura-Steel locks. The direction to open is 90 degrees clockwise. The locked position is down. The lock length is 17/64 in. and the cam length is 3/4 in. Includes 1 lock and 2 keys.

• This is a mailbox lock designed to replace Dura-Steel locks that have been damaged
• Designed with a 90 degree counterclockwise turn to unlock
• The key can only be removed when in the locked position
• Plated steel construction
• Includes 2 keys

This Mailbox Lock by Prime-Line Products is a diecast constructed cylinder lock that comes with a chrome-plated face, brass pins, and a spring steel locking clip. This lock is designed to replace a variety of manufacturer's original equipment product, and it rotates a full 90 degrees counter-clockwise to open. This mailbox lock replaces locks on mailboxes manufactured by United locks, Auth-Florence and Bommer. This lock features a 7/8 in. outside diameter and three cams. Includes 1 lock and 2 keys.

• Components of this mailbox lock are constructed of diecast, brass, steel and stamped steel materials
• Steel components come finished in a corrosion resistant, zinc plated finish and cylinder face comes in a brass plated finish
• Designed for use with mailboxes manufactured by American Device, Auth-Florence, Miami-Carey and Bommer
• Features a selection of locking cams and two keys
• Easy to install with only a few simple tools

This mailbox lock is constructed from diecast and has a nickel-plated face and cover. It features brass pins, zinc plated steel cam, and a spring steel-locking clip. This type of lock replaces the original equipment manufacturer's product.

• Fits national
• Counter clockwise rotation
• Spring clip installation
• 5-Pin tumbler
• Easy to install with a few simple tools

This multipurpose mailbox lock is constructed of diecast and comes with a nickel-plated face. A security feature of this lock prevents the key from being removed when in the unlocked position. This feature prevents forgetting the key in the lock, while at the same time ensuring the mailbox is locked every time. It includes a total of 5 zinc plated steel cams, brass pins, a spring steel locking clip, and 2 keys. To unlock this mailbox lock, the key must rotate 90 degrees in a counterclockwise direction. This mailbox lock replaces many original manufacturer locks, like those manufactured by American Device, Florence, Miami-Carey, Bommer, and Auth Electric.

• Mailbox multi-Cam lock assortment with 5-cams and 5-pin tumbler locks
• Diecast cylinder with nickel-plated face, brass pins, and spring steel locking clip
• Cams have different bolt throw lengths
• Diecast construction with a nickel-plated finish
• All cylinders rotate 90 degrees counterclockwise to open

Keep your Allux Mailbox secure and away from the elements by adding the Allux Mounting Plate. It is made of 100% aluminum and mounts to bottom of mailbox to mount in-ground for stability. Pre-drilled holes match up with bottom pre-drilled holes on Allux 800, Allux 600, and Allux Grundform parcel boxes.

• Overall: 12.5'' H x 8.5'' W x 13.5'' D
• Overall Product Weight: 4lb.