Showing results for "pull out trash can replacement"

Summit's CKPUMPKIT is an accessory package that lets you create a functioning sink without a standard water line. Designed for use with our all-in-one kitchenettes, the CKPUMPKIT features everything you need to connect a sink to a standard 5 gallon water jug. This kit includes a 5 gallon jug, 6 gallon waste water container, 110V water pump, and all of the hardware and tubing you need to install your own "no plumbing" sink. Great for efficiency housing, off-grid living, and temporary or basement kitchens, the CKPUMPKIT is compatible with Summit's 39", 48", and 60" wide kitchenettes.

• Includes everything you need to pump water from a standard 5 gallon jug to a sink
• Ships with all the tubing and hardware for easy setup
• Compatible with Summit's 39", 48", and 60" wide all-in-one kitchenettes
• Includes a 5 gallon water jug and 6 gallon waste container
• 110V pump included

Summit allows you to create a built-in look to fill space gaps when installing the into a traditional 84" high opening. Manufactured in the USA, this is constructed from powder-coated steel and finished in jet black to suit any space. If you are combining two units side-by-side, we also manufacture a wider version.

• Designed for use with a Summit refrigerator to fill 84" high spaces
• Black powder-coated steel for lasting durability and a clean look in any kitchen
• Designed and manufactured in the United States
• This accessory cannot be cut to fit smaller sizes

I love this product for a good price. Simone. . 2023-03-06 17:31:28

Summit allows you to create a built-in look to fill space gaps when installing two refrigerators into a traditional 84" high opening. Manufactured in the USA, this is constructed from powder-coated steel and finished in jet black to suit any space. For a half-sized version of this accessory, see this product.

• Designed for use when pairing two Summit refrigerator-freezers to fill 84" high spaces.
• Black powder-coated steel for lasting durability and a clean look in any kitchen
• Designed and manufactured in the United States

Summit's series of stainless steel drawer accessories creates attractive, innovative solutions for transforming the gap between a refrigerator and counter into usable storage space. The TD24SD is slide-out drawer designed for easy installation on top of shallow refrigerators (or other structures). Made in the USA, it comes that allows you to cover gaps that often occur when a refrigerator is shorter than a standard 36" high counter. The stainless steel front comes with a horizontal grain to match most refrigerator door styles. It can also be customized with your own panel overlay to blend into your kitchen cabinetry. We include a steel L-bracket with adhesive that allows you to easily install the drawer on top of your refrigerator. The drawer glides out smoothly, offering plenty of space to hold non-refrigerated items such as utensils, cookbooks, takeout menus, and more. Browse the full Summit accessory selection for more solutions that elevate your appliance into the perfect kitchen package.

• Innovative space filler lets you transform the gap between a refrigerator and counter into usable storage space
• Made in the USA - TAA compliant
• Panel-ready front lets you customize the look
• Stainless steel construction inside and out for lasting durability and a luxurious look
• Compatible with virtually any shallow depth refrigerator

Application: This power recliner lift chair linear actuator motor will open and close the lift mechanism of the power recliner or lift chair. Connects to motor handset hand control via 5 pin style connector, and connects to the power transformer via the standard 2 pin style connector. Packages: 1 x Recliner Replacement Motor Actuator. 1 x 8-Suffix AC Line. 1 x DC Line. 1 x Power Adapter. 1 x Embedded Hand Controller. 2 x Pins. 2 x Cotter Pins.

• Durable material: The electric recliner adopt for aluminum actuator and durable PA6 plastic housing, safe and reliable.
• Application: This power recliner lift chair linear actuator motor will open and close the lift mechanism of the power recliner or lift chair.

New 5304501270 Freezer Drawer Door Gasket. Approximate size: 34.65" x 24.13". Compatible Brands are Crosley, Electrolux, Frigidaire, White-Westinghouse and Kenmore.

New 5304506131 Freezer Door Gasket (White). Approximate size is 67.13" x 33.27". Compatible Brands are Crosley, Frigidaire, Tappan and Kenmore.

NuTone® interlocked make-up air dampers provide outside air when required to keep the air in the home fresher by allowing the range hood to operate at optimum levels. Slave dampers (MD6S, MD8S, and MD10S) are interlocked to the main automatic or universal make-up air damper and open in unison for synchronized operation. They close, along with the main damper, as soon as the range hood is powered off. Slave dampers can be ganged together to provide a cost-effective means to provide for higher volumes of make-up air.

• Product Type: Damper
• : Gray

Quick shipping. Haven’t installed yet. Anonymous. Halifax, NS. 2017-11-28 18:43:59

1,100-CFM, dual internal blower for use with Zephyr range hoods. This quiet but powerful blower is located inside your range hood to directly and efficiently exhaust airborne cooking contaminants. Includes two blowers. Please check your Zephyr range hood's specification sheet to ensure compatibility.

• Product Type: Blower
• Overall Height - Top to Bottom: 13''
• : Black

It arrived really quickly. It’s installed and it works good but not enough time for me to say it is really good. Just installed.. Mile. ON. 2024-09-12 17:56:48

• Product Type: Filler Kit
• Overall: 0.25'' H x 0.63'' W x 0.25'' D
• Compatible Appliance Type: Range
• Material: Metal
• Overall Product Weight: 2lb.

Looks awesome!. Mattea. Milton, ON. 2022-02-07 17:03:04

290-CFM, internal blower for use with Zephyr range hoods. This quiet but powerful blower is located inside your range hood to directly and efficiently exhaust airborne cooking contaminants. Please check your Zephyr range hood's specification sheet to ensure compatibility.

• Product Type: Blower
• Overall Height - Top to Bottom: 12''
• : Black

New W11252784 Washing Machine Washplate for Whirlpool. Part number W11252784 replaces AP6880510, WPW10286241, W10141017, W10286241, WPW10141017, 4930909, 8563616, PS12717168, EAP12717168, W10076230, W10571648. Compatible Brands are Maytag and Whirlpool.

Great product!. Santiago. . 2024-12-27 14:53:27