Showing results for "48 x 72 slides bed frame"

Adding sliding doors made it easy! Lubann introduces the top-hung bypass sliding door hardware set series. It is ideal for almost any opening type: Hallway, closet, pantry, room separation and so much more. It is an ultimate space-saving solution without sacrificing style and quality.

• Capacity and dimension requirements: Max door weight 150 lbs and two doors of minimal 36-1/2 inches wide each. Fits door thickness: 1-3/8"~1-3/4".
• The track can be cut down to fit the custom opening width.
• Hangers use a three-wheel design and heavy-duty ball-bearing, which means a stable structure with minimum friction, and smooth, quiet sliding.
• Quick release locking tab allows easy mounting or dismounting of door panels.

Very sturdy and good quality. Exactly what I needed. Cheryl. HAMILTON, ON. 2023-02-25 18:13:28

This is a 48 in. stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to desired length. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the new track is simply pressed onto the old track after squirting a thin bead of silicone glue in the replacement track. Using a rubber mallet and a block of wood, the replacement track is snapped down over the old track.

• Used to repair worn or damaged sliding patio door aluminum track
• Cap slips on existing damaged track
• Stainless steel construction
• 2 per pack
• Easy to install

Great solution. Mark. . 2024-12-30 15:31:38

This double-cylinder deadlock is constructed of diecast and it comes in a chrome-plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

• Components come in a beautiful, corrosion-resistant, brushed chrome plated finish.
• Easy to install with only a few simple tools.

Beautiful, classic colour.. Andrew. Ottawa, ON. 2024-07-03 08:50:57

Slidor's Self Closing mechanism fits to the rear of your door and is the perfect solution if you're looking for the door to close each time you open it. This is compatible with Slidor frame kits only and can be used on Single or Double pocket door installation.

• Product Type: Pocket Door Hardware
• Overall: 0.5'' H x 0.375'' W x 9'' D

This is a unique one of a kind trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two existing screws in the door. Purchase the Prime-Line part D 1548 for the steel roller version.

• Designed for use on Guaranteed Products sliding patio doors
• Mounting holes on the back end of unit
• Stamped steel housing and steel rollers
• Rear adjusting screw
• For steel rollers, use Prime-Line part D 1548

This is a single wheel; top hung, side mounted adjustable roller bracket with a 1 inch convex nylon roller that fits onto the back wardrobe door panel. The stamped steel adjustable bracket has a 1-1/8 inch offset and fits onto a 3/4 inch to 1-3/8 inch thick door. Primarily used on Cox door systems, it may also be found on a variety of other wardrobe door manufacturer's doors. For other offsets use Prime-Line parts N 6513 and N 6515.

• Product Type: Shutter/Door Accessory
• Overall: 3.15'' H x 0.95'' W x 1.12'' D

This sliding screen door roller assembly insert has a thinner high density polyethylene frame than the Prime-Line part B 646. It has an adjustable high density polyethylene inner housing and high density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door using the included screws. The roller adjusts to the correct position needed. This style is found on Columbia sliding screen doors but is also used on a variety of other sliding screen door manufacturers. Please note dimensions and design when comparing with old roller.

• Used on Columbia and Uni-Fit series doors
• 3-5/8 in. overall length
• 1 in. diameter concave roller
• High tension spring steel and high density polyethylene roller
• 2-pack

This is a sliding window roller. White plastic housing, with a flat edge plastic roller. Top rollers adjust up to provide anti-lift protection. Bottom rollers adjust up and down for alignment. Used on Hilite 200 series windows.

• Top roller used for full security and anti-lift protection
• Bottom roller used to adjust ride height

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

• Components come in a beautiful, corrosion resistant, brushed chrome plated finish
• Designed with a time-tested, jimmy-proof mechanism that helps prohibit forced entry by separation of door from jamb
• Designed for use with aluminum screens on sliding windows
• Easy to install with only a few simple tools
• Mounting hardware included

This sliding screen door roller assembly insert has an aluminum frame with a high-density polyethylene inner housing and steel ball-bearing roller. The assembly is inserted into the bottom or top of the sliding screen door with the included screws. The roller housing adjusts up and down to the correct position needed. This style is often on Columbia sliding screen doors but is also used by very many other screen door manufacturers. Please note dimensions and design when comparing with an old roller.

• Used by Columbia and a variety of other sliding screen door manufacturers
• The mounting tab is on the bottom of the insert body
• Aluminum frame and steel roller
• Adjustable height
• A Phillips head screwdriver is required for Installation

• Product Type: Push/Pull Plate
• Overall: 7.44'' H x 3.81'' W x 0.62'' D

This is a sliding window roller assembly made of extruded aluminum bracket with a flat edge steel ball bearing roller. These brackets are used on International Imperial Series 1200 windows and a variety of other window manufacturers.

• Sturdy housing slips into window slider stile and is held in place with a set screw