Showing results for "fireplace insert trim kit"

This is a stainless steel track cap used to repair worn or damaged sliding glass door aluminum tracks. Can also be used on horizontal sliding window tracks.

• Stainless steel patio door track cover
• Snaps over old track, attach with silicone adhesive
• Repairs existing patio door track
• 8 Ft. length can be cut to fit any size door
• Installation time approximately 20 minutes

. Anonymous. . 2025-02-11 11:49:55

This durable vinyl door bottom replacement insert is an easy solution to replacing your door bottom. Remove old worn inserts and replace with a new one to insure a weather tight seal.

• Fits door bottoms up to 36″ wide
• Replaces worn out vinyl inserts
• Easy to install

This extruded grey vinyl entry door threshold insert can be cut to any size. It Fits M and D and other aluminum threshold bases.

• Easy snap in design
• Cut to desired length
• Helps seal out insects, weather and noise
• No tools are required for installation
• Please refer to the line art drawing for dimensions and compare with your needs item before purchasing (Not Universal)

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

• For use on 3/4 in. thick door jambs
• Fits Combination Dead Latch And Deadbolt
• Heavy gauge steel
• Anchors to wall studs with 3-1/2 in. screws
• For further dimensional information, please see the line drawing

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

• Typically found on commercial or industrial doors
• Can be used on most doors to enhance the appearance
• 36 in. x 36 in
• Stainless steel construction
• Pre-stamped mounting holes

V1350 Replacement Strike with Shims - Black V1350 Replacement Strike with Shims - White V1350 Replacement Strike with Shims - Zinc Plated

• Die-cast and steel rod for durability. Die cast and steel rod for durability Manufactured from die cast and steel rod for durability.
• Positive spring action with slotted screw holes for easy adjustment. Fasteners included for installation.
• For interior and exterior applications Includes two shims to allow strike adjustment for secure latching.

These screen frame kits are constructed of roll-formed aluminum frame material and they come in a bronze finished colour. Using the components of this kit, up to a 36 in. x 36 in. screen frame can be constructed, or any other smaller custom sizes when cutting to size. Additional items included in this kit include the square-cut corners, vinyl spline and a charcoal fibreglass cloth. These kits are available in other sizes and colours, and they are used by many for replacing damaged and missing screens. The screen frame material is intentionally cambered (curved) outward, which helps to prevent inward bowing when screen cloth is installed and stretched taut.

• Used to construct new screen frames for missing or damaged window screens
• This kit allows for the construction of one 36 in. x 36 in. screen frame, or any other smaller size using the components of this kit
• Frame material comes in a mill finish with grey screen corners
• Aluminum frame, vinyl spline with plastic corners and charcoal fibreglass mesh
• Four square-cut plastic corners are included with each kit

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

• For use in closets where a bi-folding panel system is preferred
• Components come in a beautiful, corrosion resistant, brushed chrome plated finish
• Designed with a time-tested, jimmy-proof mechanism that helps prohibit forced entry by separation of door from jamb
• Designed for use with aluminum screens on sliding windows
• Easy to install with only a few simple tools

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This Qwik-Fix Kit come complete with all needed to repair one Round Edged Door. Kits come with wrap around plate, slide latch and keeper, bumper, Fasteners and Torx Bits. This will Increase strength and durability of the door. Parts made of chrome plated Zamak.

• Replaces missing or broken Latch with a surface mount slide latch
• Tamper-proof Fasteners
• Hides unsightly holes in doors

This Qwik-Fix kit come complete with all needed to repair one square edged door. Kits come with wrap around plate, slide latch and keeper, bumper, fasteners and Torx bits. This will Increase strength and durability of the door. Parts made of chrome plated Zamak.

• Replaces missing or broken Latch with a surface mount slide latch
• For Square edge 1 in. Inswing Door
• Tamper-proof fasteners
• Torx Bits for securing fasteners
• Hides unsightly holes in doors

Slidor's Self Closing mechanism fits to the rear of your door and is the perfect solution if you're looking for the door to close each time you open it. This is compatible with Slidor frame kits only and can be used on Single or Double pocket door installation.

• Product Type: Pocket Door Hardware
• Overall: 0.5'' H x 0.375'' W x 9'' D