Showing results for "twin hook on bed rails"

This is a drapery cord tension spring and pulley. Use these springs and pulleys to keep your cords in order. With these installed, it is easy for one handed operator of your shades and drapes. Each package contains 4 white plastic with springs. Provides proper cord tension. Has a universal application with most manufacturers. It is spring-loaded so it can make minor adjustments while you pull the cord.

• Used to repair and replace damaged or missing hardware

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 5/8 in. wide with a 11/16 in. flare, 1-1/4 in. tall with a rear adjusting screw. Replaces the old style Couples door roller and is used by a variety of patio door manufacturers.

• Ball bearing
• F-tab housing with rear adjust
• When the corner screw passes through the F tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together
• Housing is 5/8 in. wide with a 11/16 in. flare, 1-1/4 in. tall and 1-27/32 in. long (not including the inner roller housing)
• Rear adjustment screw

These anchor clips are constructed of cast stainless steel and they come in a satin finish. Each clip has a 1/8 inch offset. Together they feature a 1/4 inch offset and two (2) pre-punched installation mounting holes. This item includes one pair of clips; an inside and outside leaf, and they are used for fastening partition panels to restroom partition Pilasters.

• Restroom partition hardware used to replace damaged or missing Alcove Clips used for installation of panel components
• Each clip has 1-8 inch offset, Together is 1/4 inch offset
• 2-1/4 inch wide x 1-1/2 inch high. Installation fasteners are not included with this item

Flange nuts can help to save time by eliminating the need to use a separate nut and washer. The flange acts as a built in washer to distribute the load evenly. As with standard hex nuts, they can be installed using a wrench or socket set.

• Used to help prevent damage to sliding screen door fabric
• Double ended screw with machine screw threads on one end and wood screw threads on the other end
• Commonly used to secure swag hooks into walls or ceilings
• Also used to attach legs to furniture
• Nuts and washers not included, ensure washers and nuts are same diameter

Hanger bolts are double ended fasteners with a wood screw on one end and a machine screw on the other. A hole needs to be pre-drilled for the wood screw side. They are perfect for knockdown furniture as the machine screw end accepts a standard nut that be easily removed. Furniture with two sided wood screws cannot be disassembled and reassembled without stripping out the hole. Hanger bolts are commonly used in the assembly of bed frames or to attach table legs.

• Size: M2.5-0.45 X 10MM
• Double ended screw with machine screw threads on one end and wood screw threads on the other end
• Commonly used to secure swag hooks into walls or ceilings
• Also used to attach legs to furniture
• Nuts and washers not included, ensure washers and nuts are same diameter