Showing results for "white wall shelf with brackets"

These shelf support pegs by Prime-Line Products are constructed from heavy-duty plastic and come white. These types of shelf support pegs are commonly used in bookcases, stereo, and storage cabinets to support adjustable glass and wood shelving at up to 25 lbs. per support peg. These shelf support pegs feature a 1/4 in. peg diameter and they are easy to install. Use pliers to remove any stubborn/stuck pegs. Avoid using levels where the hole's diameter has been widened.

• Constructed of durable plastic to allow for safe loads
• These shelf support pegs come white to match and blend best in cabinets
• Designed for use in cabinets of various types
• Feature diagonal support member beneath the seat for greater support
• Easy to install with only a few simple tools

This is a shelf support peg with a 1/4 in. diameter. Plastic construction and used by a variety of cabinet manufacturers. Each peg has a 5 lb. maximum safe load.

• Easy to install
• For further dimensional information, please see the line drawing

With Speedy Shelf strips there's no need to replace shelf pins, count shelf pin holes or remove items when moving shelves up. As a shelf is lifted, built-in spring-action holders retract and then snap back into place

• Shelf strips have Interlocking ends that allow you to create continuous strips of nearly any length
• Supports are spaced 2 inches apart
• Spring loaded shelf strips are a permanent part of the strip and won't damage shelves or fall out
• Can be surface mounted or recessed
• For fastening to cabinet, use #4 x 3/4 in. wood screws OR 3/4 in. nails OR narrow crown 3/4 in. staples (not included)

. Anonymous. . 2025-05-11 18:45:27

This is a plastic shelf support peg with a 5 mm. diameter steel peg. Provides extra strength where needed. Used by a variety of cabinet manufacturers. Each peg has a 15 lb. maximum safe load.

• Use by a variety of cabinet and book case manufacturers
• Provides extra strength
• White plastic construction

These shelf pegs are constructed of plastic and come white. The 5 mm. outside diameter pegs have a 1/4 in. depth and they can support a maximum of 5 lbs. each, per peg. These pegs are easy to install.

• For further dimensional information, please see the line drawing

These shelf support pegs are constructed from plastic and come white. They are designed to fit into 5 mm. diameter holes, making them perfect for many cabinets and bookshelves. These pegs feature a 5 lb. maximum safe load capacity (per peg) and can be used for many applications. These shelf support pegs are easy to install and are used by many manufacturers.

• Constructed of durable plastic to allow for safe loads
• These shelf support pegs come white to match and blend best in cabinets
• Designed for use in cabinets of various types
• Features grooved pegs to allow for improved holding strength
• Easy to install with only a few simple tools

V211 Shelf Bracket Screws 12pk - White

• 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack
• Manufactured from steel
• Recommend to be used with National model No. 211 shelf/rod brackets.

With Speedy Shelf strips there's no need to replace shelf pins, count shelf pin holes or remove items when moving shelves up. As a shelf is lifted, built-in spring-action holders retract and then snap back into place

• Shelf strips have Interlocking ends that allow you to create continuous strips of nearly any length
• Supports are spaced 2 inches apart
• Spring loaded shelf strips are a permanent part of the strip and won't damage shelves or fall out
• Can be surface mounted or recessed
• For fastening to cabinet, use #4 x 3/4 in. wood screws OR 3/4 in. nails OR narrow crown 3/4 in. staples (not included)

This drawer track back plate is constructed from nylon. This back plate can be inverted for self adjusting applications. This back plate is used on Hat-Section style and most other centre mount tracks.

• All components constructed of a thick and durable plastic, for secure support
• Can be inverted for self adjusting applications
• Designed for use with most side mounted drawer track systems and accepts most all ball bearing drawer slide hardware that are 7/8 x 5/16 inch track
• Includes fasteners
• Please refer to the line art drawing for dimensions and compare with your original item before purchasing (Not Universal)

These rear drawer track brackets are constructed of a thick, durable plastic and they come in white, left and right-hand pair. They are designed to support and maintain alignment of bottom/side-mounted steel drawer slides they feature an easy to install design, with a 3-9/16 in. socket depth to allow for front to back adjustment of the drawer slides. This pair of drawer track back plates includes the installation fasteners, and they have a maximum load rating of 75 lbs. per pair. These rear drawer replacement track sockets are simple to install and are used by many.

• Used to support side mounted drawer glides
• Fits drawer track systems that are 3/8 in. x 1 in
• Contains 1 pair of drawer track back plates (1 left and 1 right)
• Mounting hardware included
• A Phillips head screwdriver is required for installation

right part quickly sent. Angela. Windsor, ON. 2024-04-19 11:26:27

This L shape support bracket can be used in various functions. It is a perfect item to add support to your window decoration, bookshelf, and more.

• Very easy to install, and has various length for you to choose.

This monorail drawer track front brackets by Prime-Line Products are constructed from plastic and come white in colour. These support brackets can be used with most furniture drawer systems, that were designed with a single, monorail support and glide system that mounts and supports from underneath the centre of the drawer. Use this drawer track bracket to repair drawers that have damaged or missing hardware. It is perfect for your dressers, hutches and night stand drawers that use the monorail system.

• Constructed of a thick and durable plastic to provide sufficient support
• Designed for use with most side mounted drawer track systems and accepts most all ball bearing drawer slide hardware
• Features slotted installation mounting holes for easy adjustment
• Easy to install with only a few simple tools