Showing results for "pull out trash can cabinet"

*** Note: This product includes only one drawer. A **12-inch width drawer** refers to a drawer box with an **11-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **12 inches of space** for installation. Suitable for **RTA cabinets B15 and pantry cabinets PC15**. A **15-inch width drawer** refers to a drawer box with a **14-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **15 inches of space** for installation. Suitable for **RTA cabinets B18 and pantry cabinets PC18**. An **18-inch width drawer** refers to a drawer box with a **17-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **18 inches of space** for installation. Suitable for **RTA cabinets B21**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **21-inch width drawer** refers to a drawer box with a **20-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **21 inches of space** for installation. Suitable for **RTA cabinets B24 and pantry cabinets PC24**. A **24-inch width drawer** refers to a drawer box with a **23-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **24 inches of space** for installation. Suitable for **RTA cabinets B27**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **27-inch width drawer** refers to a drawer box with a **26-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **27 inches of space** for installation. Suitable for **RTA cabinets B30 and pantry cabinets PC30**. A **30-inch width drawer** refers to a drawer box with a **29-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **30 inches of space** for installation. Suitable for **RTA cabinets B33**. **Note:** This cabinet size is not very common. Please carefully measure the **internal width** of your cabinet, not the external width. A **33-inch width drawer** refers to a drawer box with a **32-inch width** and a **21-inch depth**. The slides need to be installed on both sides of the drawer box, requiring at least **33 inches of space** for installation. Suitable for **RTA cabinets B36 and pantry cabinets PC36**.

• The drawer uses dovetail joints, which are the strongest connection method available today—much stronger than using nails.
• Solid Wood: This drawer is made of 5/8 inch thick solid wood with an ultra-strong 1/4 inch thick plywood bottom.
• Fully extended ball bearing drawer slides (tracks)

Finally gain easy slide-out access to those bins hiding in your kitchen, pantry, bathroom, and laundry room cabinets. Lynk professional bin holder’s unique design adjusts to convert almost any bin or recycling container into an easily accessible pull-out in just minutes. Lynk’s unique smooth steel welds and beautiful commercial chromed steel construction give you unparalleled strength and durability for a lifetime of trouble-free use. The patented ProGlide® industrial-grade ball-bearing glides ensure smooth gliding even under the weight of heavy containers. And with our proprietary easy mount design, setup is quick and easy with just 4 screws – included because our clever alignment guide does the measuring for you. Lynk Professional® offers a complete selection of pull-out under-cabinet organizers for any cabinet in your home. US Patent # 7,810,890 Product Dimensions: 10-1/8" W x 20-1/4" L x 11-1/4" H. Requires a minimum 11-inch cabinet opening. Hardware included. Bin not Included. Customers also found our product through the following search terms: under the sink, garbage can pull out, kitchen trash can under the sink, under sink trash can pull out, trash bin cabinet, 35-quart trash can, hidden trash can, under cabinet garbage can pull out, under cabinet trash can pull out, under counter trash can, rolling trash can, garbage cabinet for kitchen, double garbage cans for kitchen, trash cabinet pull out, double trash can cabinet pull out, garbage sliding system.

• Overall: 10.1'' W x 20.25'' D

Fits perfectly with the type of plumbing under sink. Put dish cloth on pull out. Great. Easy to put together.. Kathy. Oakville, ON. 2021-04-10 18:43:47

This always is thinking about organization and convenience and this door mount kit simply adds to it. Designed to work on the 5WB1, 5WB2, RV, and 5CW2 pull-out organizers and trash/waste containers to simplify the process of opening and closing. Simply remove your existing cabinet door and mount it to the brackets. The kit is not required to make your organizer work and is simply an option. (please note that many (not all) of these waste containers already include door mount kits, so double-check to ensure it is needed).

• : 1.5lb.
• : 8'' H x 1.5'' W x 2.13'' D

. Patricia Elaine. BC. 2025-01-20 18:23:30

The 14'' double-bin drawer (Front panel: 14''W x 13''H; Back panel: 9''H; Depth: 21'') fits B18 cabinets.

Rev-A-Shelf's fillers revolutionized otherwise wasted space in your kitchen. Normally a "Filler" or extra space is simply covered up with a decorative front, but with rev-a-shelf's line of fillers, it turns that otherwise wasted space into useful space. Fillers are intended to be installed in new kitchen cabinet construction and will not work in existing cabinets. The 432 wall series is available for 3” and 6” widths and features adjustable shelves with chrome rails and full-extension ball-bearing slides. If you're tired of cluttered, unorganized, and hard-to-access cabinets, then look no further than Rev-A-Shelf's pullout shelving system. This innovative accessory pulls from the cabinet giving you complete accessibility and visibility. Available in varying sizes, the door mount is for one-step opening and closing.

• Maximize space and efficiency in your kitchen cabinets with this wall filler pull-out organizer
• Attractive natural maple wood construction with semi-gloss finish and chrome accent rails
• Features adjustable shelves that glide effortlessly on full-extension, ball bearing, 100-pound rated slides
• Comes fully-assembled and ready to install in between your new kitchen cabinet construction; not intended to be installed in existing cabinets
• Manufacturer warranty: Limited lifetime warranty

This Rev-A-Shelf 432-BF Base Filler Pullout Between Cabinet Organizer revolutionizes otherwise wasted space in your kitchen. Normally a "filler" or extra space is simply covered up with a decorative front, but with Rev-A-Shelf's line of fillers, it turns that otherwise wasted space into useful space. Fillers are intended to be installed in new kitchen cabinet construction and will not work in existing cabinets. Has adjustable shelves with chrome rails and full-extension ball-bearing slides. This package contains 1 wood filler, 3 adjustable shelves, and chrome rails. Double-check your cabinet's opening (inside dimensions) to allow the best fit. Measure side to side (width), front to back (depth or length), and top to bottom (height). Double-check to make sure your product is within measurements and don't forget to take into account any obstructions (plumbing, hinges, etc.).

• Overall Depth - Front to Back: 23''

With the contractors help, I decided to stack 2 3"fillers to increase capacity. Also we added a push pop type of door latch which works amazing. Be careful with amount of push needed because there isnt much give. The cheap mechanisms need to be pushed in almost an inch and wouldn't work. Still renovating, but I love this add on!. Kori. East Garafraxa, ON. 2020-03-22 08:16:46

You love your stand mixer but hate how hard it is to transfer from cabinet storage to the countertop. The Rev-A-Shelf Small Appliance Lift Mechanism attaches to any custom shelving to make it easy to access your bulky appliances with minimal lifting. With design flexibility in mind, the heavy-duty chrome mixer lift can be attached to any custom-made shelf and therefore will fit all full-height cabinets with a minimum frame opening of 12 inches. Considered the "best in the industry", the RAS-ML-HDCR features built-in shock dampeners, and adjustable spring tension, and holds appliances up to 60 pounds. By installing this spring-loaded bracket kit, you can eliminate the hassle of squatting and lifting heavy appliances like food processors, blenders, and toasters. This system is perfect the perfect safe solution for people with back pain or other accessibility concerns. Double-check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double-check to make sure your product is within measurements and don't forget to take into account any obstructions. Stop lifting and start mixing with the revolutionary Mixer/Appliance Lift Mechanism Hardware by Rev-A-Shelf.

• Overall: 24'' W x 12'' W x 22.5'' D

My husband did the installation. He thinks that it takes time to complete but easy and the instructions were clear. It’s a bit wobbling other than that it’s a good product.. JK. Laval, QC. 2021-06-21 20:13:42

Since concealing your waste bin not only free up space but also improves your kitchens appearance, why not hide it under the cabinet with the HOLDN STORAGE Waste Can Slide-Out? Conveniently keep your waste bin out of sight. The sliding shelf neatly hides your garbage while still easily within reach by simply pulling the handle. Makes food preparation easier, your space cleaner, and prevents any accidental spills and mess. Perfect for kitchens and pantries.

This sleek and modern organizer is a must-have for any contemporary kitchen or pantry. It boasts a robust steel construction with a high-quality paint finish, blending durability with modern elegance. Its 3-tier layout offers extensive storage space, ideal for organizing a wide range of items such as jars, spices, and small appliances. Perfectly compatible with most kitchen cabinets, this organizer can be easily mounted on any hard surface. Its compact design and flexible mounting options make it suitable for various cabinet styles. Made from premium steel, this organizer is designed to endure daily wear and tear. The powder paint coating not only adds a sophisticated look but also provides extra protection against wear and corrosion. Installation is straightforward, with all necessary hardware included and easy-to-follow instructions.

Very important! Please read our detailed measuring guide under 'specifications' before placing your order. This slide-out shelf is custom-made to fit the measurements of your cabinet’s clear opening width and unobstructed interior depth. You will round down and select your closest cabinet opening width and depth measurements from the drop-down menus above. Note: we will manufacture your slide-outs based on the cabinet measurements you select from the drop-down menu. Once installed, your slide-out shelf will have an approximate ¼ - inch clearance on each side for a perfect fit. To begin, first reference the cabinet measuring guide in the 'specifications' section below. All slide-a-shelf cabinet organizers are custom-made to fit your clear cabinet opening width and unobstructed internal depth measurements. Don’t assume measurements. Watch our how-to-measure video and use our measuring guide; cabinets can be constructed in a variety of ways and utilize different hinges/hardware that can impact your measurements. Full extension rails: the slide-a-shelf standard made-to-fit slide-out shelf featured here includes steel full-extension ball-bearing rails. It comes fully assembled for quick and easy installation to the base/floor of your cabinet or existing full shelf…an installation template and all hardware are included. This slide-out shelf will fit perfectly and increase the usable storage space of the existing cabinets in your home. They are ideal for your kitchen, pantry, bathrooms, laundry room, linen closet, or garage. Now, you can finally get organized and enjoy the convenience of having all the items you store within easy reach. Say goodbye to messy and cluttered shelves. Unlike other roll-out shelves, all slide-a-shelf models are custom-made to fit your cabinets. Choice of wood front: the slide-a-shelf standard made-to-fit slide-out shelf is available in your choice of 4 wood fronts to complement your cabinet finish and décor. Birch (pre-finished) maple (ready to finish) oak (ready to finish) poplar (ready to paint) structure: slide-a-shelf standard made-to-fit slide-out shelves are designed with dado and rabbet joint construction for superior strength and are maintenance-free for years of convenience. Installation takes only minutes with a battery-powered Phillips screwdriver. You can find our easy installation guide under the ‘specifications’ below.

• Overall: 5.5'' W x 19.5'' D

No more bending down or rifling through drawers of utensils or shelves of spices. With the Rev-A-Shelf 5-Inch Kitchen Cabinet Pull-Out Organizer, storing kitchen essentials has never been so simple. Simply slide the organizer out and back in when you want to access your ingredients or kitchen tools. The 3 removable stainless steel bins house all your needed utensils, and the 2 adjustable shelves with chrome rails hold your spices and oils. The full-extension blumotion slides feature a soft close and can support up to 110 pounds. Door mounting is a breeze with Rev-A-Shelf's patented door mounting brackets that provide up to 5 inches of flexibility for trouble-free installation on any door style. Designed for a 9-inch cabinet with a minimum 5.5-inch opening, this organizer will work for all full-height under cabinets. This pull-out organizer measures 6 inches wide, 21.63 inches deep, and 25.5 inches tall. Double-check your cabinet's opening to allow the best fit. Measure side to side, front to back, and top to bottom. Double-check your product is within measurements, and don't forget to account for any obstructions. Maximize what your kitchen cabinets can do with the Rev-A-Shelf 5-Inch Kitchen Cabinet Pull-Out Organizer.

• Overall: 5.5'' W x 21.625'' D

It is perfect. I love how easy it was to install…for my husband.. MaryLou. West Lorne, ON. 2023-09-22 18:26:38

Heavy-Duty, Smooth-Gliding Slide-Out Organizer: Constructed from robust metal with an ultra-smooth sliding mechanism, this organizer is designed to hold a large collection of pots and pans. It glides effortlessly and quietly, ensuring a noise-free experience. Capable of holding up to 80 pounds, this expandable sliding shelf offers durable and reliable storage for all your cabinet organization and weight-bearing requirements.