Airtight Recessed Lighting Trims

3" Round Regressed Gimbal LED with inegral driver in connection box. Its unique design provides a fit that can simplify installation. Air-Tight gimball approved for Insulated celing and wet location with no housing needed.

Great pot lights, installed in kitchen over counters to add task lighting. Well constructed and installed quickly by my electrician.. Rebecca. ON. Mon Nov 16 2020

Our Recessed family has grown with a new range of adjustable downlights. The effortless design and high functionality of these fixtures are sure to make a welcome addition to any room.

- As you’d expect in an LED pot light - Good quality fixture; durable, no moving parts - If it ever burns out there is no bulb to change but the LED should last a long time and replacing would be pretty easy - Connects direct to 120v power, no additional extra low voltage transformer required - Comes with electrical connectors and wire grommet - The springs are strong and can do any thickness from 0" to any least 1” - A little switch on the transformer allows colour temperature change - The trim has a tilting gimbal feature so you can aim the fixture - Not a slim fixture, the heatsink on the LED chip is quite large but also allows the light to be very bright. Bradley. Embrun, ON. Tue Aug 04 2026

8" Round Deep Regressed LED with Elegant Design Without Glare. Interchnageable trims with high end finishes.

Sergey. Mon Jun 03 2024

4" Round Deep Regressed LED with Elegant Design Without Glare. Interchangeable trims with high-end finishes.

Jordan. Pincourt, QC. Fri Aug 21 2026

When searching for lighting flexibility, look no further than our 4” flat gimbal LED downlight. With a powerful lumen output and the ability to shine your light on a 360-degree rotation and a 90° tilt angle, this product will meet your every need.

Great lights....put them 2' apart to highlight wall - worked well.... Dana. Nashua, NH. Thu Aug 26 2021

Just as described. Worked Perfectly. Bertram. Austin, TX. Sun Oct 25 2015

This is an American retro-style downlight with built-in LED light source and a copper-toned finish with gold accents.The standard recessed light with the 8w led light source,It is well-lit and combines practicality with aesthetics.

These take the prize for pretty where can lights are concerned! Can’t go wrong with these your eyes will thank you they get to look at these instead of boring basic can lights lol. Sarah. Tulsa, OK. Thu Sep 17 2026

4" Square Recessed LED with Integral Driver in Connection Box. Air tight fixture with round back to ease hole drilling and alignment.

Very happy with purchase. Anonymous. Ottawa, ON. Sat Dec 26 2020

Combining a modern look and high performance, this ultra-low profile, the surface-mount downlight is designed for new construction, remodeling, and retrofit applications. These 6-in. lens downlights simply install directly to a junction box or can retrofit 6-in. insulated ceilings (IC) and non-IC recessed housings and feature 5 CCT selectability.

perfect light! easy for our electrician to install and love that the light warmth is adjustable. Brittany. Columbus, OH. Sun Mar 15 2026

The Halo LT56 combines the energy savings, long life and sustainability of LED in an easy to install retrofit baffle trim kit. Dual-position torsion springs pull the trim tight to ceiling; use in new construction, remodeler and retrofit installation in Halo and other compatible 5 in. and 6 in. recessed housings. The diffuse lens provides shielding to the source and wet location listing; suitable for use in showers or in outdoor covered ceiling applications. Also conforms with NFPA requirements for closet use. Integral driver provides 120-Volt phase cut dimming, an inline connector provides power using a medium base socket adapter provided or connect directly to the mating connector in the LED housings. Ships with a gasket and makes any housing airtight for added energy savings and code compliance.

Excellent. Denise. Daysland, AB. Sun Aug 24 2025

4" Round Regressed Gimbal LED with inegral driver in connection box. Its unique design provides a fit that can simplify installation. Air-Tight gimball approved for Insulated celing and wet location with no housing needed.

The lights are what we expected and in perfect condition. First shipment we were sent the wrong size lights, wayfair promptly shipped out the correct size but it did delay our electrician coming back over 1 week later.. Angie. Windsor, ON. Sun Sep 27 2020

6" Round Super Thin Recessed Ultimate Led 13.5 W, suitable for recessed ceilings, showers, and soffits! Certifications include cULus, Energy Star and T24.

Bryan Kent. West Kelowna, BC. Wed Aug 25 2021

Recessed 6" Round LED with intergral driver in connection box. Fixture is 1/2" thin, making it easy to install directly under joists to maximize layout flexibility.

Keith. Victoria, BC. Fri Dec 10 2021

Generation Lighting’s new 4" downlight, Verra, redefines the lighting experience by blending the refined look of traditional recessed downlights with the installation ease of wafer downlights. Its smooth, regressed trim delivers a clean, modern aesthetic, while its versatile design is engineered to meet the needs of both new construction and remodel projects. Style or simplicity, Verra adapts effortlessly to any lighting application.

3" Square Regressed Gimbal LED with inegral driver in connection box. Its unique design provides a fit that can simplify installation. Air-Tight gimball approved for Insulated celing and wet location with no housing needed.

Anonymous. Markham, ON. Fri Aug 09 2024

Recessed 8" Round LED with intergral driver in connection box. Fixture is 1/2" thin, making it easy to install directly under joists to maximize layout flexibility.

very elegant. Karim. Pasadena, CA. Thu Mar 19 2020

The Halo LT4 combines the energy savings, long life, and sustainability of LED in an easy-to-install retrofit baffle trim kit. Friction blades hold the trim tight to the ceiling; use in new construction, remodeler, and retrofit installation in Halo and other compatible 4 in. recessed housings. The diffuse lens provides shielding to the source and wet location listing; suitable for use in showers or in outdoor covered ceiling applications. Also conforms with NFPA requirements for closet use. The integral driver provides 120-Volt phase cut dimming, and an inline connector provides power using a medium base socket adapter provided or connect directly to the mating connector in the LED housings. Ships with a gasket and makes any housing airtight for added energy savings and code compliance.

2" Eyeball Gimbal Recessed Round LED with Integral Driver in Connection Box. It fits where no other recessed fixture can! Its unique design allows for an air-tight insulation with no housing needed.

Great product and quick shipping.. Alan. Oshawa, ON. Sat May 08 2021

3" Eyeball Gimball Recessed Round LED with intergral driver in connection box. Its unique design provides a fit that can simplify installation. Air-Tight gimball approved for Insulated celing and wet location with no housing needed.

Troy. Sat Jun 08 2024

Recessed 4" Square LED with integral driver in connection box. Commercial Grade Quality with Architectural Design.

Excellent quality. Very nice and even light beams with a wide spread. . Ryan. Amherstview, ON. Tue Sep 08 2020

4" Square Deep Regressed 25° CRI 90+ Plenum Rated Wet Type IC Air-Tight Energy Star & T24 (except DTW 32K). Price Includes Trim Of Your Choice

Anonymous. Mon May 02 2022

Good quality. Cinthya. Chula Vista, CA. Sat Jul 23 2016

Refresh a row of ceiling lights with this set of 12 recessed light trims from TORCHSTAR. Each trim is made of iron and finished in oil rubbed bronze/white/silver, a look that pairs well with vintage styling and warm wood furniture. The metal step baffle reflects light from the bulb to create softer, more even illumination with less glare. These trims are designed for standard 4-inch recessed cans and fit Halo and Juno remodel housings. They work with PAR16, PAR20, and BR20 bulbs, as well as halogen, incandescent, and LED bulbs of the same size, so you can update the bulb without replacing the fixture. Each trim has a baffle inner diameter of 3.5 inches, a top diameter of 2.68 inches, a ring diameter of 5 inches, and a height of 1.89 inches. Please check these measurements against your existing can before ordering. Suitable for indoor use only and not water resistant.

Product looks great, so excited to have them installed!. Emily. Des Moines, IA. Wed Feb 18 2026

There are moments when you want the ability to direct light as you please. With our new LED Gimbal recessed fixture, this has now become a reality with the easiest of installations.

Works great 4 years later!. Lauren. Grapevine, TX. Sun Feb 08 2026

This product uses a retractable spotlight that is adjustable up to 90 degrees from vertical to provide flexible illumination.

Laura. Florida, FL. Tue Sep 16 2025

6" Square Recessed LED with Integral Driver in Connection Box. Air-tight fixture with round back to ease hole drilling and alignment.

Andrea. Paris, ON. Mon Jun 21 2021

4" Eyeball Gimball Recessed Round LED with intergral driver in connection box. Its unique design provides a fit that can simplify installation. Air-Tight gimball approved for Insulated celing and wet location with no housing needed.

Extremely high quality worth the . Metal frame and well built, you won’t be disappointed.. Josh. Toronto, ON. Thu May 06 2021

This new arrival 6 inches baffle trim kit would be preferred by most professional contractors and electricians due to its considerate design and reliable quality. Compatible Bulbs This trim is designed for use with recessed cans that have an inner diameter of 5.9-6.3 inches and a height of 6-7.25 inches and ceiling lighting fixtures. It works with PAR30, PAR38, BR30, BR40, A19 or any halogen, incandescent and LED bulbs of similar sizes. Softer Lighting The 6 inches light trim has metal step baffle to create the soft light effect. It is made by durable metal, which is more long lasting than other plastic trims, without aging or yellowing. Its excellent performance makes it last longer, reducing the costs of maintenance or replacing light fixtures. Easy Installation The trim’s installation is fast and easy thanks to the plug-n-play design, just use retention clips to hold it firmly to the housing. This trim can be used to cover gaps caused by miss-cuts and over-sized holes or to conveniently cover unsightly and torn drywall caused by the removal of old existing trim. Note - The trim is airtight if you use an airtight recessed can. - The gasket on the socket side should be removed if you use the trim with a non IC rated recessed can. - Please adjust the height of the housing well before the installation, then after installing trim, it can work with PAR30, BR30, PAR38, BR40, A19 and other E26 base bulbs. Specifications: Material: Iron Compatible bulb: PAR30, PAR38, BR30, BR40, A19, etc Compatible recessed can type: 6 inches can with E26 socket

Works well, no issues after 3 years. Laura. Indianapolis, IN. Sun Jul 26 2026

Anti-microbial white paint. The Edge-lit LED round button light is designed for recessed or surface-mounted installations, delivering strong evenly distributed light output with the latest in LED technology. This button light is sure to light up your application in an eco-friendly, energy-efficient style. Class II, 24V remote, and plug-in transformers allow up to 20 button lights to be wired together.

It would have been nice to know than the transformer isn’t included with the light.. Orlin. Yakima, WA. Sat Apr 11 2020

With a slim profile and the latest LED technology, the Everlume 6-inch LED Retrofit Recessed Trim modernizes traditional recessed cans with ease, without complex alterations. This energy-efficient solution delivers 1000 lumens of uniform 3000K light with a flat diffuser that minimizes glare compared to standard bulbs. Perfect for renovations, its ultra-thin profile mimics the look of modern wafer downlights while maintaining compatibility with ELV or TRIAC dimmers to prevent flickering (wall dimmer not included). The trim is constructed from corrosion-resistant plastic finished in Satin White. It features an E26 socket adaptor and an LED quick connector and is designed to work with many 6-inch recessed housings. Wet-rated and featuring a gasketed trim and secure spring clips for a sealed, flush-mount fit, the trim is ideal for bathrooms, showers, and covered outdoor spaces.

[This review was collected as part of a promotion.] What any easy upgrade. I was able to updated 3 fixtures in my house in under 30 mins. The flush mount looks clean and bright. I no longer look up and see the bulky light bulb sticking down from the can fixture. 100% improvement.. Mattz. Fri Oct 16 2026

Generation Lighting’s new 4" downlight, Verra, redefines the lighting experience by blending the refined look of traditional recessed downlights with the installation ease of wafer downlights. Its smooth, regressed trim delivers a clean, modern aesthetic, while its versatile design is engineered to meet the needs of both new construction and remodel projects. Style or simplicity, Verra adapts effortlessly to any lighting application.

[This review was collected as part of a promotion.] Offers lighting that is both functional in performance and aesthetic. Small 4in frame with multiple colors option from warm to cool tones. Light weight, heat resistant and easy to install. Overall great product to use in your modern home.. Lyanniss2_3991. Sun Jan 25 2026

Works great!. George. Guilford, CT. Mon Jun 26 2017

2" Round Regressed Gimbal with Integral Driver in Connection Box. It fits where no other recessed fixture can! Its unique design allows for an air-tight insulation with no housing needed.

Anonymous. Wed Oct 25 2023

When searching for lighting flexibility, look no further than our 4” flat gimbal LED downlight. With a powerful lumen output and the ability to shine your light on a 360-degree rotation and a 90° tilt angle, this product will meet your every need.

These small pot lights appear to be exactly what I needed for my installation. The swivel (gimbal) is ingenious and, as I am installing them on a vaulted ceiling, I should be able to have them point back towards the outside walls instead of towards the middle of the room as non-swiveling pots would have done.. Morley. Calgary, AB. Tue Jun 29 2021

2" Square Regressed Gimbal with Integral Driver in Connection Box. It fits where no other recessed fixture can! Its unique design allows for an air-tight insulation with no housing needed.

Pretty good product. Tricky to calculate and ultimately position the lights for optimum light effect. Gimbals DO NOT move easily to adjust the light direction without removing from the ceiling. Wish they were more readily adjusted to focus the light.. Daniel. Sudbury, ON. Fri Apr 15 2022

Recessed 8" Round LED with intergral driver in connection box. Commercial Grade Quality.

Our new LED panel lights are more accessible than ever before. The sleek and minimal construction allows for the easiest of installations.

Sandra. Miami Beach, FL. Sun Aug 02 2020

Our new LED panel lights are more accessible than ever before. The sleek and minimal construction allows for the easiest of installations.

Recessed 8" Round LED with intergral driver in connection box. Commercial Grade Quality.

RL6 Deep Baffle Modules produce soft white light and features a deeper regressed baffle for better glare control. The RL6 die-cast construction makes any housing AIR-TITE, for added HVAC savings and code compliance.

Recessed 6" Round LED with Integral Driver in Connection Box. Commercial Grade Quality with Architectural Design.

We love the new lights! We updated our lighting at the same time that we had new soffit installed and are so happy. The lights are brighter than our last ones and look super modern.. Cass. Guelph, ON. Fri Dec 17 2021

Recessed 4" Round LED with intergral driver in connection box. Fixture is 1/2" thin, making it easy to install directly udner joists to maximize layout flexibility.

Recessed 4" Round LED with integral driver in connection box. Commercial Grade Quality with Architectural Design.

4" Round Regressed Gimbal LED with inegral driver in connection box. Its unique design provides a fit that can simplify installation. Air-Tight gimball approved for Insulated celing and wet location with no housing needed.

Modern and effective downlighting suitable for outdoor application. Driver units don't come with cable grommets (required for installation) which I would expect at this price point. Hole saw size required for installation is a very large 4.75" which is more rare to find if you are mounting these in a wood soffit and cannot use drywall cutting tools.. Claudio. Winnipeg, MB. Tue Aug 18 2020

24V DC Input Version Recessed 4" Round LED Fixture. Connect multiple fixtures to one driver - up to 8 per a 96W power supply. Dimmability depends on the power supply used.

Only trim. Tracy. Wed Oct 30 2019