Outsunny 12' x 6' x 6.5' Polycarbonate Greenhouse with Adjustable Roof Vent, Walk-in Heavy Duty Greenhouse with Aluminum Frame, Rain Gutter and Sliding Door for Winter, Silver

Very clever kit with very minimal written directions. Pictorials don’t completely explain some things, but you can figure it out if you are good at assembling. It took at least a full week to assemble it. More hands help, or use temporary bracing to hold parts in place. It just included a small screwdriver and wrench, but luckily I had a ratcheting socket wrench set, and hired a highly skilled handyman, who had a cordless drill. We set the base on PT 4x4. Three 12’ long worked, but you need to assemble the bottom 1st, then measure to exact sizes. I will add a couple photos to show the “clips” used to hold panels in place. Overall, it’s pretty solid after complete assembly and no pieces were missing, which was a relief. It won’t stay very warm if not sheltered. All the braces go on the inner side & all the plastic panels go on the outside. The vents assembly has to be hooked under the edge of the ridge at top, and set so they can hook slots in #4 pieces onto the tab (it should point up). Pictures should show that better. I rate it 3 stars for directions, or 4 for the ingenious but tricky connections.

The reviews that talk about the difficulty of putting this together is true. My husband and I worked for 6 hours with power tools to put this together. The directions to put this together is all pictures and no words which makes it more difficult to ensure we have the right screws, the correct angles, and so forth. We will have to build a foundation to anchor the greenhouse down to sustain the winds in Iowa.

I love it. It’s what I expected exactly but I will make a few modifications, but a great piece to start with.

Missing parts, instructions are just made to give you frustration, super cheaply made. Made to last week or two All reviews with 5 stars are definitely fake

It’s ok the door doesn’t stay on track very well and panels with any wind pop out the set up took a long time instructions were terrible only buy if you can read blueprints it’s not a step by step thing over all it’s way over priced for what it is

Can't wait to put this together. Always wanted a greenhouse.

Instructions are terrible. No words- only pictures. Not something I would recommend, unless you have patience.

Regret. I should have bought the panels and built a treated wood frame. This kit is a flimsy aluminum erector set. There are many important details skipped over in the instructions. You can not built this kit with the tools provided.

I’ve found similar greenhouses for twice the money on other sites. The product appears to be the same as the smaller harbor freight one I bought a few years back. Over 4 winters and a lot of storms with wind and snow, I had a few panels pop out only once after a big storm. Add a self tapping screw to the middle of the short side of each panel and it should be more than sufficient. I did make a base about 12” high from rail road ties to make it a little taller and anchor it down. I’m sure a 2x10 frame is gonna be enough for this one, it’s a small step to get in but headroom is much better

I haven't got it yet. I was very worried when you used fedX. Now I have to try and tract it.