Versatile Outdoor 48 in. W x 21 in. D Resin Tool Shed With Shelf

This is exactly what I needed and the description was spot on. It is not super heavy duty but I didn't need that. I attached it to a patio support beam and it is rock solid. The only con I see with it is that the floor is not super supportive. When you step on it, it gives a little. But again, not what I was concerned about. I use it to store a pressure washer, shop vacuum, router table, and assembly table. I attached some plywood to the inside walls in order to attach things to it. I had to add a piece of plywood outside to reinforce the shed wall and it seems to be holding fine.

One of the hardest things to put together that I’ve ever had. Flimsy too.

This is an ok shed and will serve its purpose but was challenging to assemble and isn't level or super sturdy. We have it setup under a deck so it's sheltered but I don't think it would withstand normal weather conditions.

Way too many parts. Most difficult assembly

The pkg arrived as 1 box. I opened & immediately determined it was not the quality I expected. Turns out there was a 2nd box that arrived the next day that had all the hardware & corner supports. Feeling better about it I decided to assemble it. Be very careful reading the illustrations as it is easy to end up needing to remove & reverse. The worst thing is that I purchased this particular item after spending 2 weeks looking for a 21” deep shed to fit behind a gate. After assembling I measured & it was 24”

Great size. Not the easiest to put together but it is doable. One panel came damaged and waiting for it to arrive.

Great!

Great for outdoor deck

Very complicated to put together, and I didn't like how the panels are made they are flimsy and easy to bend, not so confident that it will last long.

Finished product is very good. It is all about getting to the end of assembly. I bought 2 with the first one taking 6 and a half hours to assemble and the second less than 2 hours. There is a learning curve. I did it alone which wasn't a problem because of my skill set, but it would be very frustrating for a person who isn't handy. Electric or cordless screw gun is a must, not a simple screwdriver project. If you lay everything out ahead of beginning and read each and every part of the directions you'll be pleased with the end product.